|
|||||||
| Register | FAQ | Members List | Calendar | Mark Forums Read |
| Welcome to V6P.net! |
|
Hey there! It looks like you're enjoying V6 Performance.net Forums but haven't created an account yet. Why not take a minute to register for your own FREE ACCOUNT now? As a member you get free access to all of our forums, ability to upload and share photos, access to your own personal garage to show off your ride, and the ability to post your own messages, communicate directly with other members and much more! Register now! Already a member? Login at the top of this page to stop seeing this message. |
| V6P Sponsor | |||
|
![]() |
|
|
Thread Tools | Search this Thread | Display Modes |
|
|
#1 |
|
A-Spec of Indianapolis
|
Tire Wear, Camber, Toe and Caster Explained
"Caster" is the rearward tipping of the steering axis, and is the one aspect of front end alignment responsible for most steering quirks. The rearward tip of the steering axis is what causes a vehicle to track straight when you take your hands off of the wheel, and what causes the wheel to return to center when you let go. Thrust Angle and Steering Wheel Position Thrust angle (other than zero) occurs when the individual rear toe values are unequal. The easiest example to imagine is for a car with a live rear axle (one piece) that has the axle fitted crocked in the body such that one rear wheel has toe-in and the other one has toe-out. Thrust line is an angle of the resultant drive direction compared to the vehicle centreline. Cars driven with high thrust angles may appear to 'crab'. On cars, which have independent suspension, some are individually adjustable for toe, which can then be used to correct both the toe-in and thrust line together. Thrust angle should where possible always be adjusted to zero, to coincide with the vehicle centreline. Sign definition A positive thrust angle is one that points to the left. A negative thrust line is one that points to the right. Straight steering wheel Errors in the steering wheel being straight on road test can be the rear toe being wrong and a high thrustline. (As well as the front track-rods being adjusted un-equally or steering wheel having been fitted incorrectly). Computerised aligners measure and record the thrustline and at the adjustment stage will set the steering wheel level allowing for any thrust angle. It is for this reason that the adjustment step on all aligners takes you first through rear toe adjust, to give you the opportunity of reducing the thrust angle as far as possible, before moving on and adjusting the front toe and steering wheel. Last edited by MichaelBenz; February 18th, 2008 at 10:32 AM.. |
|
|
|
|
|
#5 |
|
A-Spec of Indianapolis
|
No problem!
|
|
|
|
|
|
#6 |
|
A-Spec of Indianapolis
|
Fixed Pic Links
|
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|