Pa1nt13aller Dyno (finally) - Honda Accord Forum : V6 Performance Accord Forums
Ribbon Banner

Go Back   Honda Accord Forum : V6 Performance Accord Forums > CAR SPECIFIC DISCUSSION > 7TH GENERATION HONDA ACCORD (2003-2007) > 7G HONDA ACCORD PERFORMANCE DISCUSSION
Register FAQ Members List Calendar Mark Forums Read Insurance
V6Performance.net is the premier Honda Accord Forum on the internet. Registered Users do not see the above ads.
Like Tree23Likes

Reply
 
LinkBack Thread Tools Display Modes
Old July 20th, 2015, 04:07 PM   #1
Registered User
 
pa1nt13aller's Avatar
 
Join Date: Mar 2014
Location: Minnesota
Posts: 497
Pa1nt13aller Dyno (finally)

Long overdue....Finally getting dyno'd tomorrow morning and I will post the results up as well as a video then. Here are my current engine mods:

-J32a3 block
-J35a8 heads decked n valve ported
-J37 intake manifold & throttle body, port matched
- V2 intake
-RV6 J pipe
-Borla exhaust
-Unorthodox underdrive pulley
-Hondata tuned

I'm guessing around 312whp :P

Here is a pic :P

757shonuff likes this.

Last edited by pa1nt13aller; July 21st, 2015 at 10:47 AM..
pa1nt13aller is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old July 20th, 2015, 04:32 PM   #2
Registered User
 
05accord6spd's Avatar
 
Join Date: Feb 2012
Location: Minnesota
Posts: 424
283
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
05accord6spd is offline   Reply With Quote Quick reply to this message
Old July 20th, 2015, 05:11 PM   #3
Registered User
 
thisaznboi88's Avatar
 
Join Date: Dec 2007
Location: West Virginia
Posts: 8,733
270
thisaznboi88 is offline   Reply With Quote Quick reply to this message
 
Old July 20th, 2015, 05:37 PM   #4
Registered User
 
Join Date: Apr 2014
Posts: 328
275
Rich01 is offline   Reply With Quote Quick reply to this message
Old July 20th, 2015, 06:18 PM   #5
Registered User
 
pa1nt13aller's Avatar
 
Join Date: Mar 2014
Location: Minnesota
Posts: 497
467
pa1nt13aller is offline   Reply With Quote Quick reply to this message
Old July 20th, 2015, 06:39 PM   #6
The Jester
 
Join Date: Apr 2013
Posts: 1,351
293
oraclem19 is offline   Reply With Quote Quick reply to this message
Old July 20th, 2015, 08:06 PM   #7
Registered User
 
accord325's Avatar
 
Join Date: Jul 2012
Location: Tampa
Posts: 2,392
Seriously, I'm guessing 285whp/248wtq
accord325 is offline   Reply With Quote Quick reply to this message
Old July 20th, 2015, 08:23 PM   #8
The Jester
 
Join Date: Apr 2013
Posts: 1,351
280/240
Thats a big bottom end, with some very free flowing heads, and ported. ported will put it above 270, but drop the torque a bit. Borla constrictions might raise the torque some. Supporting mods from higher compression up to support the high hp, didnt notice PCD but I assume its there, RV6 plus hondata, allows for higher than 230 tq, +1 from the UR pulley taking some of the drag off the engine. Hope there are some cams in there
oraclem19 is offline   Reply With Quote Quick reply to this message
Old July 20th, 2015, 09:43 PM   #9
Registered User
 
pa1nt13aller's Avatar
 
Join Date: Mar 2014
Location: Minnesota
Posts: 497
Just the j35a8 cams. I just hope I get above 300 at this point...
pa1nt13aller is offline   Reply With Quote Quick reply to this message
Old July 21st, 2015, 05:59 AM   #10
Registered User
 
Join Date: Apr 2014
Posts: 168
275
screaminz28 is offline   Reply With Quote Quick reply to this message
Old July 21st, 2015, 06:54 AM   #11
Registered User
 
05accord6spd's Avatar
 
Join Date: Feb 2012
Location: Minnesota
Posts: 424
Where in Minneapolis are you getting dynoed? At map?

Last edited by 05accord6spd; November 1st, 2015 at 01:52 PM..
05accord6spd is offline   Reply With Quote Quick reply to this message
Old July 21st, 2015, 09:08 AM   #12
Registered User
 
pa1nt13aller's Avatar
 
Join Date: Mar 2014
Location: Minnesota
Posts: 497
Nope at rsmotors. And of course right as I'm filling out vehicle info they tell me their rollers locked up and the dyno is not functioning....awesome.
pa1nt13aller is offline   Reply With Quote Quick reply to this message
Old July 21st, 2015, 09:13 AM   #13
Registered User
 
accord325's Avatar
 
Join Date: Jul 2012
Location: Tampa
Posts: 2,392
Who tuned you? Do you know how much timing you have in the car?
accord325 is offline   Reply With Quote Quick reply to this message
Old July 21st, 2015, 09:16 AM   #14
Registered User
 
pa1nt13aller's Avatar
 
Join Date: Mar 2014
Location: Minnesota
Posts: 497
Dom tuned me. I personally don't know the advance....but we messed with it quite a bit. Dyno might be later today if it's fixed, tomorrow, or who knows when....
pa1nt13aller is offline   Reply With Quote Quick reply to this message
Old July 21st, 2015, 09:18 AM   #15
Registered User
 
accord325's Avatar
 
Join Date: Jul 2012
Location: Tampa
Posts: 2,392
You going to test multiple maps (lean, rich, less time, more time, etc) ?
accord325 is offline   Reply With Quote Quick reply to this message
Old July 21st, 2015, 10:33 AM   #16
Registered User
 
pa1nt13aller's Avatar
 
Join Date: Mar 2014
Location: Minnesota
Posts: 497
Quote:
Originally Posted by accord325 View Post
You going to test multiple maps (lean, rich, less time, more time, etc) ?
Once Dom gets back to me, awaiting his email for the other calibrations. I was just going to go dyno it with my current tune but now that im delayed I can do mulitple maps. The motor on the dyno seized up they just updated me...so idk when dyno day is going to be now...hopefully soon...
pa1nt13aller is offline   Reply With Quote Quick reply to this message
Old July 22nd, 2015, 03:59 PM   #17
Registered User
 
Join Date: Oct 2014
Location: Oregon
Posts: 32
its blocked at work. what numbers did it make?
spectre86 is offline   Reply With Quote Quick reply to this message
Old July 22nd, 2015, 04:44 PM   #18
Registered User
 
Join Date: Apr 2014
Posts: 168
Quote:
Originally Posted by spectre86 View Post
its blocked at work. what numbers did it make?
Reading is fundamental...


Quote:
Originally Posted by pa1nt13aller View Post
The motor on the dyno seized up they just updated me...so idk when dyno day is going to be now...hopefully soon...
Just for clarity - I'm pretty sure paintballer means the brake on the dyno or the dyno's motor - not HIS motor.

Last edited by screaminz28; July 22nd, 2015 at 04:45 PM.. Reason: clarified
screaminz28 is offline   Reply With Quote Quick reply to this message
Old July 23rd, 2015, 07:15 AM   #19
Registered User
 
pa1nt13aller's Avatar
 
Join Date: Mar 2014
Location: Minnesota
Posts: 497
Quote:
Originally Posted by screaminz28 View Post
Reading is fundamental...




Just for clarity - I'm pretty sure paintballer means the brake on the dyno or the dyno's motor - not HIS motor.


Yes thank you :P. They said they would call me when they get everything taken care of...but its been 2 days so...Ill call em later today if they dont call me back. Im sure they got backed up with all their projects since the dyno broke down....meh
pa1nt13aller is offline   Reply With Quote Quick reply to this message
Old August 2nd, 2015, 04:02 PM   #20
Registered User
 
Sonnick's Avatar
 
Join Date: Aug 2005
Posts: 4,828
I bumped this thread with the hope of numbers Any updates?
accord325 likes this.
__________________
7.5G J30 6spd -- 13.28 @107.56
Full Bolt ons/Street Tune/3.94 Final Drive
Instagram = j30_allmotor

Last edited by Sonnick; August 2nd, 2015 at 04:14 PM..
Sonnick is offline   Reply With Quote Quick reply to this message
Old August 3rd, 2015, 10:52 AM   #21
Registered User
 
pa1nt13aller's Avatar
 
Join Date: Mar 2014
Location: Minnesota
Posts: 497
Quote:
Originally Posted by Sonnick View Post
I bumped this thread with the hope of numbers Any updates?
Yessir just called this morning and stopping in around 11:30am tomorrow
Sonnick and 757shonuff like this.
pa1nt13aller is offline   Reply With Quote Quick reply to this message
Old August 3rd, 2015, 12:16 PM   #22
Registered User
 
accord325's Avatar
 
Join Date: Jul 2012
Location: Tampa
Posts: 2,392
I'm on the edge of my seat. I think the Borla is holding you back (I know) but I can pin down a number.

WHAT TYPE OF DYNO IS IT??
Atlas.46 likes this.
accord325 is offline   Reply With Quote Quick reply to this message
Old August 3rd, 2015, 12:33 PM   #23
Registered User
 
pa1nt13aller's Avatar
 
Join Date: Mar 2014
Location: Minnesota
Posts: 497
Well I modified my borla a little bit but the exit is still the same...sadly its a mustang dyno...
pa1nt13aller is offline   Reply With Quote Quick reply to this message
Old August 3rd, 2015, 01:04 PM   #24
Registered User
 
thisaznboi88's Avatar
 
Join Date: Dec 2007
Location: West Virginia
Posts: 8,733
Where are the numbers??? Ha hah don't worry I have a magnaflow cat back that I need to modify the flange. The flange is 2.25in and I want it to be 2.5 so that it's straight 2.5 through
thisaznboi88 is offline   Reply With Quote Quick reply to this message
Old August 3rd, 2015, 01:19 PM   #25
Registered User
 
Sonnick's Avatar
 
Join Date: Aug 2005
Posts: 4,828
Did you dyno prior to your J32? If not, the numbers themselves will just be numbers. Regardless of dyno, as long as you go back to the same one each time, the GAINS are what matter - whether the dyno reads 280 or 230 means nothing. I will say this over and over...I made 235/194 on the Mainline and 274/238 on a Dynojet. I ran 13.28 @107 regardless of what the dyno read. Dynos are strictly tools for gauging gains from modifications and tuning. It's rewarding to know that your money was well spent.
Rich01 likes this.
__________________
7.5G J30 6spd -- 13.28 @107.56
Full Bolt ons/Street Tune/3.94 Final Drive
Instagram = j30_allmotor
Sonnick is offline   Reply With Quote Quick reply to this message
Old August 3rd, 2015, 01:45 PM   #26
Registered User
 
pa1nt13aller's Avatar
 
Join Date: Mar 2014
Location: Minnesota
Posts: 497
Nope but I will be running a baseline for one of the runs to see how much the tune gave me...I just want to see what I'm at
Sonnick likes this.
pa1nt13aller is offline   Reply With Quote Quick reply to this message
Old August 3rd, 2015, 02:27 PM   #27
Registered User
 
Sonnick's Avatar
 
Join Date: Aug 2005
Posts: 4,828
Good luck! Definitely interested in your tuning gains.
__________________
7.5G J30 6spd -- 13.28 @107.56
Full Bolt ons/Street Tune/3.94 Final Drive
Instagram = j30_allmotor
Sonnick is offline   Reply With Quote Quick reply to this message
Old August 3rd, 2015, 09:13 PM   #28
Registered User
 
Join Date: Apr 2014
Posts: 328
...and...? Interested in base vs tuned.
Rich01 is offline   Reply With Quote Quick reply to this message
Old August 4th, 2015, 10:07 AM   #29
Registered User
 
pa1nt13aller's Avatar
 
Join Date: Mar 2014
Location: Minnesota
Posts: 497
Well turns out it was 2 runs for $80 not 3....so I did my current tune vs another random one with a lower vtec engagement point.

This was done on a MUSTANG DYNO, not a dynojet. Apparently mustang dyno's read lower is what I hear...

RESULTS:

304whp
250wtq

GRAPH:



Here are the 2 videos:

https://youtu.be/7y-3hbeiRGs

https://youtu.be/CDtbbnJrYyU
pa1nt13aller is offline   Reply With Quote Quick reply to this message
Old August 4th, 2015, 10:29 AM   #30
Registered User
 
thisaznboi88's Avatar
 
Join Date: Dec 2007
Location: West Virginia
Posts: 8,733
wtf 304whp on a mustang dyno? That stupid high

Last edited by thisaznboi88; August 4th, 2015 at 10:41 AM..
thisaznboi88 is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Reply


Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Honda Accord Forum : V6 Performance Accord Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:
Chapter
Choose your AV6 Chapter Location
Ride
What do you drive?
Insurance
Please select your insurance company (Optional)

Log-in


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On