Is this the type of rear camber kit i need???? - Honda Accord Forum : V6 Performance Accord Forums
Ribbon Banner

Go Back   Honda Accord Forum : V6 Performance Accord Forums > CAR SPECIFIC DISCUSSION > 7TH GENERATION HONDA ACCORD (2003-2007) > 7G HONDA ACCORD WHEELS, TIRES, & SUSPENSION DISCUSSION
Register FAQ Members List Calendar Mark Forums Read Insurance
V6Performance.net is the premier Honda Accord Forum on the internet. Registered Users do not see the above ads.

Reply
 
LinkBack Thread Tools Display Modes
Old March 22nd, 2005, 03:43 PM   #1
Registered User
 
Igotvtec04's Avatar
 
Join Date: Nov 2004
Posts: 807
Is this the type of rear camber kit i need????

shox.com has Ingalls rear camber kit, that can adjust from - 1.5 to +3 degrees for $119. im installing tein basic on my 04 coupe V6, is that the kind of rear camber kit i need, is that the one you you can also adjust the toe??? I will be droping the rear 1.7". If you guys know any other place sells the same brand cheaper LET me know asap, before i place an order here.

Last edited by Igotvtec04; March 22nd, 2005 at 04:23 PM..
Igotvtec04 is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old March 22nd, 2005, 04:53 PM   #2
Registered User
 
Igotvtec04's Avatar
 
Join Date: Nov 2004
Posts: 807
I need a place i can get cheap Ingalls rear camber, the kind you can adjust camber/toe??
the cheapest one ive seen is from shox.com, but not sure if that camber and toe.
Igotvtec04 is offline   Reply With Quote Quick reply to this message
Old March 22nd, 2005, 05:42 PM   #3
ex scientia vera
 
kramer2k's Avatar
 
Join Date: Jul 2004
Location: Jacksonville, FL
Posts: 3,570
Quote:
Originally Posted by Igotvtec04
I need a place i can get cheap Ingalls rear camber, the kind you can adjust camber/toe??
the cheapest one ive seen is from shox.com, but not sure if that camber and toe.
Try iapdirect.com. That's where I bought my SPC camber kit from.
kramer2k is offline   Reply With Quote Quick reply to this message
 
Old March 22nd, 2005, 05:49 PM   #4
Registered User
 
Igotvtec04's Avatar
 
Join Date: Nov 2004
Posts: 807
but i heard ingalls is better, you can adjust both camber and toe

Last edited by Igotvtec04; March 22nd, 2005 at 06:48 PM..
Igotvtec04 is offline   Reply With Quote Quick reply to this message
Old March 22nd, 2005, 05:50 PM   #5
ex scientia vera
 
kramer2k's Avatar
 
Join Date: Jul 2004
Location: Jacksonville, FL
Posts: 3,570
Quote:
Originally Posted by Igotvtec04
but i heard ingalls in better, you can adjust both camber and toe
They have that brand as well.
kramer2k is offline   Reply With Quote Quick reply to this message
Old March 23rd, 2005, 04:57 AM   #6
Registered User
 
Raddy21's Avatar
 
Join Date: Oct 2004
Location: Bethesda, MD
Posts: 1,136
yeah who has best price on SPC Rear Camber for 7gens, thats what im tryin to do
Raddy21 is offline   Reply With Quote Quick reply to this message
Old March 23rd, 2005, 07:43 AM   #7
ex scientia vera
 
kramer2k's Avatar
 
Join Date: Jul 2004
Location: Jacksonville, FL
Posts: 3,570
Quote:
Originally Posted by Raddy21
yeah who has best price on SPC Rear Camber for 7gens, thats what im tryin to do
I paid $144 shipped from iapdirect.com. They are offering free shipping and I used GBCSPC as the coupon code to get $5 off.
kramer2k is offline   Reply With Quote Quick reply to this message
Old March 23rd, 2005, 11:19 AM   #8
Registered User
 
Raddy21's Avatar
 
Join Date: Oct 2004
Location: Bethesda, MD
Posts: 1,136
ok thanks kramer2k!
Raddy21 is offline   Reply With Quote Quick reply to this message
Old March 23rd, 2005, 12:31 PM   #9
Registered User
 
Join Date: Nov 2004
Posts: 87
i have spc camber for my rears...i paid 190 installed..
mofo. is offline   Reply With Quote Quick reply to this message
Old March 23rd, 2005, 01:33 PM   #10
Registered User
 
Raddy21's Avatar
 
Join Date: Oct 2004
Location: Bethesda, MD
Posts: 1,136
Quote:
Originally Posted by Igotvtec04
the cheapest one ive seen is from shox.com, but not sure if that camber and toe.
yes very cheap here ...hmm...
Raddy21 is offline   Reply With Quote Quick reply to this message
Old March 23rd, 2005, 01:52 PM   #11
Make Way for The Bad Guy!
 
JoeySmallz's Avatar
 
Join Date: Jul 2003
Location: New York
Posts: 762
Send a message via AIM to JoeySmallz
Comptech has front and rear camber kits out for the 7th gen. also. That's what I'll be getting with by Tein SS
JoeySmallz is offline   Reply With Quote Quick reply to this message
Old March 23rd, 2005, 03:35 PM   #12
Registered User
 
Join Date: Dec 2003
Posts: 406
Send a message via AIM to macboi
there a guy that sells spc rear on ebay forlike 120$ shipped
macboi is offline   Reply With Quote Quick reply to this message
Old March 23rd, 2005, 03:37 PM   #13
Registered User
 
Join Date: Dec 2003
Posts: 406
Send a message via AIM to macboi
Quote:
Originally Posted by Igotvtec04
but i heard ingalls is better, you can adjust both camber and toe

SPC doesn't adjust toes? oh snap
macboi is offline   Reply With Quote Quick reply to this message
Old March 23rd, 2005, 03:41 PM   #14
Registered User
 
Igotvtec04's Avatar
 
Join Date: Nov 2004
Posts: 807
the website (iapdirect.com) im ordering the ingalls is in backorder, but they have SPC, only camber can be adjusted. With Ingalls camber and toe, do i really need toe adjustment im only lowering the rear 1.7"?????

damn, shox.com is also out stock. Any other place you guys know???

Last edited by Igotvtec04; March 23rd, 2005 at 04:00 PM..
Igotvtec04 is offline   Reply With Quote Quick reply to this message
Old March 24th, 2005, 02:21 PM   #15
Registered User
 
Jinx32's Avatar
 
Join Date: Jan 2002
Location: NJ
Posts: 352
Do your research. Each side with the Ingalls kit requires the installation of 2 suspension arms, the lower arm and the control arm. You will need 2 kits to do both sides of the car, total of 4 bars to be installed. 1 kit runs about $130. See link and call your distributor for details before ordering, to make sure you don't end up with only enough parts to do one side of the car.

The Ingalls kit replaces the lower arm, pulling the bottom of the wheel in to adjust camber. But it pulls it back at a slight angle which affects the rear toe, so they also replace the mid/rear control arm to push the toe back into spec.

The SPC kit replaces only the upper arm, pushing the top of the wheel back out. It does not affect toe.


http://www.ingallseng.com/parts/38725.htm

J
Jinx32 is offline   Reply With Quote Quick reply to this message
Old March 24th, 2005, 02:31 PM   #16
Registered User
 
Igotvtec04's Avatar
 
Join Date: Nov 2004
Posts: 807
are you telling me that jinx? are you saying with out those two suspension arm the camber kit will be useless, and can not be installed.
i thought you only need camber kit nothing else. Im only lowering the back 1.7".

Last edited by Igotvtec04; March 24th, 2005 at 02:34 PM..
Igotvtec04 is offline   Reply With Quote Quick reply to this message
Old March 24th, 2005, 02:44 PM   #17
Registered User
 
Jinx32's Avatar
 
Join Date: Jan 2002
Location: NJ
Posts: 352
Quote:
Originally Posted by Igotvtec04
are you telling me that jinx?
i thought you only need camber kit nothing else. Im only lowering the back 1.7".
Just posting in general for everyone to really look at what they are paying for. I've seen too many people pay $90 for a camber kit and only get the one side. Funny actually.

Regardless, I have HFP and SPC camber kit. There is a notch on the SPC kit in the threads that tells you how far you can safely twist it before you are too far. With the HFP kit, I eyeballed it to the length of the stock rod and it was already at the limit of how far you can adjust it. Seems like it needs more threads on mine. I think HFP was to lower the rear 1". I took it to one place for an alignment and they said it was out of adjustment, couldn't go any further and it's barely in spec. I took it to the dealership for alignment after that. I highlighted the instructions that state clearly not to twist it past that mark. They aligned the car with no problems. I am unsure if they went past "the mark" on the camber kit. Makes me nervous.

J
Jinx32 is offline   Reply With Quote Quick reply to this message
Old March 24th, 2005, 02:47 PM   #18
Out of my Mind, Somewhere
 
TooHypper's Avatar
 
Join Date: Dec 2002
Location: Bay Area, CA
Posts: 2,500
Send a message via Yahoo to TooHypper
I got the SPC arms for $62 an arm, then I had Toby put them in.
TooHypper is offline   Reply With Quote Quick reply to this message
Old March 24th, 2005, 06:57 PM   #19
The Poker KING
 
Join Date: Apr 2004
Location: Los Angeles
Posts: 612
Send a message via AIM to LIL TANE
Igotvtec04, you'll be okay, iapdirect.com states they cover both left and right

All Camber Kit Pricing Is For Both Left and Right Corners Unless Otherwise Specified
LIL TANE is offline   Reply With Quote Quick reply to this message
Old March 25th, 2005, 04:11 AM   #20
Registered User
 
Igotvtec04's Avatar
 
Join Date: Nov 2004
Posts: 807
jinx32 quoted,"Each side with the Ingalls kit requires the installation of 2 suspension arms,".......

is that with ingalls only???do i need the two suspension arms with SPC??
Igotvtec04 is offline   Reply With Quote Quick reply to this message
Old March 25th, 2005, 06:53 PM   #21
odk
Registered User
 
odk's Avatar
 
Join Date: Oct 2004
Posts: 230
Got my Ingalls kit (pair,four bars) from Mantaray Motorsport Racing in Calif. $132.96. Free shipping. Received in 1 week.
odk is offline   Reply With Quote Quick reply to this message
Old March 26th, 2005, 05:01 PM   #22
U a Ryder Or a Hater?
 
04rydah's Avatar
 
Join Date: Sep 2004
Location: LA - City of Angels
Posts: 492
Send a message via AIM to 04rydah
im not even gettin one ... just get it aligned... with my 1.8" all around drop camber is not bad at all ... i dunno ... just get it aligned... tire wear is there but oh well ...
04rydah is offline   Reply With Quote Quick reply to this message
Old March 26th, 2005, 06:55 PM   #23
Registered User
 
Igotvtec04's Avatar
 
Join Date: Nov 2004
Posts: 807
Quote:
Originally Posted by 04rydah
im not even gettin one ... just get it aligned... with my 1.8" all around drop camber is not bad at all ... i dunno ... just get it aligned... tire wear is there but oh well ...
you got a pics of your car, and could you also post your alignment result
Igotvtec04 is offline   Reply With Quote Quick reply to this message
Old March 26th, 2005, 07:12 PM   #24
U a Ryder Or a Hater?
 
04rydah's Avatar
 
Join Date: Sep 2004
Location: LA - City of Angels
Posts: 492
Send a message via AIM to 04rydah
Quote:
Originally Posted by Igotvtec04
you got a pics of your car, and could you also post your alignment result

will do
04rydah is offline   Reply With Quote Quick reply to this message
Old March 26th, 2005, 10:26 PM   #25
Registered User
 
NightShift's Avatar
 
Join Date: Apr 2003
Posts: 885
Send a message via AIM to NightShift
wow, i thought i finally had it figured out with the springs and camber.... now we got toe issues and suspension arms? now im confused...i'll never get my car lowered haha
NightShift is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Reply


Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Honda Accord Forum : V6 Performance Accord Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:
Chapter
Choose your AV6 Chapter Location
Ride
What do you drive?
Insurance
Please select your insurance company (Optional)

Log-in


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On