7th gen TSX projector with audi style LED strip - Honda Accord Forum : V6 Performance Accord Forums
Ribbon Banner

Go Back   Honda Accord Forum : V6 Performance Accord Forums > V6P MARKETPLACE > CLASSIFIEDS
Register FAQ Members List Calendar Mark Forums Read Insurance
V6Performance.net is the premier Honda Accord Forum on the internet. Registered Users do not see the above ads.
Reply
 
LinkBack Thread Tools Display Modes
Old January 13th, 2010, 09:07 PM   #1
Registered User
 
Join Date: Apr 2009
Posts: 25
7th gen TSX projector with audi style LED strip

Ok so I fell upon some hard times and decided some of my extras have to go . I had the retrofit done by a member on gen7 but upon receipt of the retros, they were adjusted too high and the passenger side adjusting screw was stripped out. Basically the retrofit was rushed, which means the projectors will need to be remounted inside the housings with different brackets. Being a full time student and worker means I don't have the time, nor the patience to perform this, so I have to get rid of them. I paid over $700 for everything, I'm asking for $500. This fix should be pretty easy for someone with basic knowledge of this and some spare time. My loss is your gain. These are quality parts, so please do NOT lowball me and no wasting my time. These are all the pics I have. http://i834.photobucket.com/albums/z.../Photo0317.jpg
rossum possum is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old January 13th, 2010, 09:12 PM   #2
Brad
 
bdeitemeyer's Avatar
 
Join Date: Sep 2003
Location: Tampa, FL
Posts: 4,318
Send a message via AIM to bdeitemeyer
1) your link to a pic isn't working

2) it's not that easy of a fix at all
bdeitemeyer is offline   Reply With Quote Quick reply to this message
Old January 13th, 2010, 11:33 PM   #3
Resident Pessimist
 
slow4door's Avatar
 
Join Date: Nov 2009
Location: SoCal
Posts: 122
I broke the link and went direct to his account and found these....





slow4door is offline   Reply With Quote Quick reply to this message
 
Old January 14th, 2010, 04:02 PM   #4
-Gene
 
phunctional's Avatar
 
Join Date: Jun 2009
Location: Venice Beach
Posts: 1,562
lets see pics of the led strip in action
phunctional is offline   Reply With Quote Quick reply to this message
Old January 14th, 2010, 04:54 PM   #5
Sosi baklazhani bydlo
 
LiquidXplosion's Avatar
 
Join Date: Sep 2009
Location: Philadelphia proper
Posts: 710
Send a message via AIM to LiquidXplosion
Ill take them for 300. To redo that means a pretty much new retro. New brackets have to be made, the pass side light needs to be completely redone, and that cutoff is weak. Ill be the first to point out the issues before the retro gurus start flaming it as crap.
LiquidXplosion is offline   Reply With Quote Quick reply to this message
Old January 14th, 2010, 05:18 PM   #6
Registered User
 
thisaznboi88's Avatar
 
Join Date: Dec 2007
Location: West Virginia
Posts: 8,735
Quote:
Originally Posted by LiquidXplosion View Post
Ill take them for 300. To redo that means a pretty much new retro. New brackets have to be made, the pass side light needs to be completely redone, and that cutoff is weak. Ill be the first to point out the issues before the retro gurus start flaming it as crap.
I don't think Ross is going to sell it for that much. He lost way too much $$$
__________________
~~FlashPro dyno-tuned by innovative-motorworks (383whp/313wtq @ 7.5 psi without boost controller)~~
~~FlashPro e-tuned by Domgsr-t (405whp/345+wtq) @ 8.5psi ~~ **currently running**
thisaznboi88 is offline   Reply With Quote Quick reply to this message
Old January 14th, 2010, 05:39 PM   #7
Sosi baklazhani bydlo
 
LiquidXplosion's Avatar
 
Join Date: Sep 2009
Location: Philadelphia proper
Posts: 710
Send a message via AIM to LiquidXplosion
Quote:
Originally Posted by thisaznboi88 View Post
I don't think Ross is going to sell it for that much. He lost way too much $$$
Did you make them? lol Hes better off getting them redone and keeping them in that case
LiquidXplosion is offline   Reply With Quote Quick reply to this message
Old January 14th, 2010, 06:01 PM   #8
Registered User
 
thisaznboi88's Avatar
 
Join Date: Dec 2007
Location: West Virginia
Posts: 8,735
Quote:
Originally Posted by LiquidXplosion View Post
Did you make them? lol Hes better off getting them redone and keeping them in that case
Nah I didn't make them. If I did he wouldn't have this problem in the first place. I triple check my ****. Put it on. If I don't like how it looks take it out cut and redo, until its close to my high expectation. I probably have to open up my e46 retros again since the left side a little higher then the right and its bugging me. lol
__________________
~~FlashPro dyno-tuned by innovative-motorworks (383whp/313wtq @ 7.5 psi without boost controller)~~
~~FlashPro e-tuned by Domgsr-t (405whp/345+wtq) @ 8.5psi ~~ **currently running**
thisaznboi88 is offline   Reply With Quote Quick reply to this message
Old January 14th, 2010, 07:29 PM   #9
Registered User
 
FLAccord05's Avatar
 
Join Date: Oct 2008
Location: Columbia, MD
Posts: 215
Send a message via AIM to FLAccord05
If I'm not mistaken, you can see the LED's. They look like they run accross the middle of the headlight.
FLAccord05 is offline   Reply With Quote Quick reply to this message
Old January 14th, 2010, 08:47 PM   #10
Growth Chart Specialist
 
Shenaniganz08's Avatar
 
Join Date: Jul 2007
Location: Hawthorne
Posts: 3,422
Send a message via AIM to Shenaniganz08
yeah I don't think you'll get $500, its pretty hard to sell retros that need work here on the forums ( as has been shown in past threads)

that right projectors is reallllly off
Shenaniganz08 is offline   Reply With Quote Quick reply to this message
Old January 14th, 2010, 09:12 PM   #11
Registered User
 
thisaznboi88's Avatar
 
Join Date: Dec 2007
Location: West Virginia
Posts: 8,735
yup especially that s2k one. That dude never replied back. lol
thisaznboi88 is offline   Reply With Quote Quick reply to this message
Old January 14th, 2010, 10:43 PM   #12
Sosi baklazhani bydlo
 
LiquidXplosion's Avatar
 
Join Date: Sep 2009
Location: Philadelphia proper
Posts: 710
Send a message via AIM to LiquidXplosion
haha, that dude is long gone. The line for them is down the block and around the corner. Well my offer is 300. Its not just the right side thats off, the drivers side is also crooked. Thats a freaking job and a half to redo those.
LiquidXplosion is offline   Reply With Quote Quick reply to this message
Old January 15th, 2010, 03:08 AM   #13
Registered User
 
DownshifteD's Avatar
 
Join Date: Dec 2007
Posts: 190
I will offer $301.....JK.
DownshifteD is offline   Reply With Quote Quick reply to this message
Old January 15th, 2010, 06:46 AM   #14
Official V6P Retro Whore
 
dreamer's Avatar
 
Join Date: Jun 2003
Location: CA
Posts: 3,899
wow, a retro I won't even buy....

truly a landmark fs thread for me here people.

gl with sale.
dreamer is offline   Reply With Quote Quick reply to this message
Old January 21st, 2010, 12:04 AM   #15
LED/HID Retrofitter
 
atm3535's Avatar
 
Join Date: Nov 2008
Location: gilbertsville, PA
Posts: 202
Quote:
Originally Posted by LiquidXplosion View Post
Did you make them? lol Hes better off getting them redone and keeping them in that case
I agree.. that was a horrible job for 700 bucks. I could have done a way better job for his asking price jeez sorry dude, you got ripped!!!
atm3535 is offline   Reply With Quote Quick reply to this message
Old January 21st, 2010, 12:18 AM   #16
Sosi baklazhani bydlo
 
LiquidXplosion's Avatar
 
Join Date: Sep 2009
Location: Philadelphia proper
Posts: 710
Send a message via AIM to LiquidXplosion
I dont think this guy is coming back either. Whats with the retro sellers disappearing lol.
LiquidXplosion is offline   Reply With Quote Quick reply to this message
Old January 21st, 2010, 02:14 PM   #17
Resident Pessimist
 
slow4door's Avatar
 
Join Date: Nov 2009
Location: SoCal
Posts: 122
Last Activity: January 15th, 2010 04:30 PM
slow4door is offline   Reply With Quote Quick reply to this message
Old January 24th, 2010, 08:16 PM   #18
original member!
 
Nittanys1's Avatar
 
Join Date: Aug 2002
Location: Raleigh, NC
Posts: 7,172
Send a message via AIM to Nittanys1
Quote:
Originally Posted by LiquidXplosion View Post
I dont think this guy is coming back either. Whats with the retro sellers disappearing lol.
this is why i dont like letting noobs make for sale threads....
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

SPONSORS:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
-
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
-
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Nittanys1 is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Reply


Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Honda Accord Forum : V6 Performance Accord Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:
Chapter
Choose your AV6 Chapter Location
Ride
What do you drive?
Insurance
Please select your insurance company (Optional)

Log-in


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On