|February 21st, 2011, 04:42 PM||#1|
LIPPSTUH's Acura CL-S6 Part Out
Hey guys, I'm parting out the easy things first. Some require swap otherwise stated. Pictures will come once I get the chance to, right now car is in the shop. Please read every detail and the notice below.
NOTICE: Some parts will require locals unless you can ship me your part and wait for me to swap yours with mine before I send you mine. Obviously think before you message me. I will do locals first. I'm in NO RUSH to sell, so chill out. Also, if I list something too high, PM me don't post in here. I haven't been around recently so I'm not familiar with prices of used items.
Prices are OBO, shipping not included, fees not included. I will take deposits for larger items (nonrefundable so think before you buy). I don't like using Paypal, cash/certified checks are preferred. In the end, MONEY TALKS.
Parts fit: 2nd gen CL, 2nd gen TL, 6th gen Accord. Others may very
1. Random Technology XLR8 Hi-Flow Cat
Details: 2.5 in/out
Condition: est. 17,000 miles
Price: $220 / $150 + trade
Might need your (working) stock cat
2. Custom Magnaflow Exhaust (Requires stock trade)
Details: Uses Greddy Evo 2 Pipping. Scrapes on underside of tip
Price: $250 + cost of labor + trade
3. AEM Blue Cold Air Intake
Details: It was cut in the middle to be converted for the supercharger. I have a coupler there now, works the same.
Condition: est. 30,000 miles. Filter cleaned 10,000 miles ago
4. Ingalls Camber Arms Requires stock trade
Details: This is NOT just the ball joint replacement, it is the whole arm. Modified to produce more negative camber, still corrects camber as well.
Condition: est. 10,000 miles
Price: $120 + trade
5. SOLDSPC Rear Camber Arms
Details: Goes to -4.0 camber, also corrects camber. One side is new then the other, the older side's bushing is cracked badly, but it doesn't affect performance or makes noise
Condition: See above
Price: $120 SOLD
6. SOLDNeuspeed Strut Bar (Polished)
Details: No "Neuspeed" sticker
Price: $80 SOLD
7. Weathertech Window Visors
Details: They're the light shaded ones
Condition: Chips in one or two corners, can't see it while installed
8. Sarona Roof Spoiler
Details: Needs repaint
Condition: Body shop needs to primer and paint
9. Custom 3 12" Trunk Enclosure
Details: My old set up, already out of the car. Would need to trade your trunk lining. Subs not included
Condition: I would rewrap it. Additional $80 + material cost and I'll rewrap it for you
Round 2 parts will require more time for me to prepare I will list them here without details for those interested, but be warned they might not be ready just yet.
10. Custom TL 99-01 Lip Kit (Requires front oem bumper trade + oem side skirts)
Details: Front lip is molded to front bumper. Sideskirts are molded on top of CL sideskirts. Rear lip is screwed onto rear bumper (not molded).
Condition: You will need repaint since I have a custom color. Front bumper requires some body work, shouldn't be costly just some filler around parts of the lip.
Price: $1000 + trade
11. PENDINGPSPEC Short shifter (Requires Stock shifter assembly trade)
Details: Only true short shifter made for the CL.
Condition: Its metal, superb lol
Price: $150 + trade PENDING
12. Voodoo Shift Knob (Requires trade)
Condition: Has a tiny chip, who cares really?
Price: $35 + trade
13. SOLDRedline Goods Shift Boot: Black leather with red stitching (Requires Trade)
Details: I ordered 1" shorter than stock. Also see item #12
Condition: 1 month old
Price: $40 + tradeSOLD
14. Redline goods Arm Rest: Black leather with red stitching + extra padding (Requires trade)
Details: I ordered a huge roll of padding and it's SO THICK, very nice, feels so good.
Condition: 1 month old
Price: $60 + Trade
15. Custom Navi setup (Requires some trade)
Details: Used stock navi bezel and custom mounted aftermarket double din (not included). Custom fabricated climate control to stock radio position. Right under it is a molded Kicker XSRC (amp remote, not included but can be). Trade requires stock non-navi bezel and possibly a single din bezel
Price: $150 + trade
16. Rotora Big Brake Kit
Details: Red calipers, a few minor paint chips here and there. Cross/drilled rotors.
17. Eibach front & rear Sway Bars
Details: Rear comes with an adjustable endlink. Won't separate.
Condition: It's a sway bar.... doesn't get old or ****ty
18. XS Power Headers
Details: It's fine, comes with the crappy flexpipe that I would recommend replacing since it'll be off the car
Condition, downpipe probably has a dent from being really low
Price: FREE if you uninstall it and reinstall my stock headers :thumbsup:
19. Ralco Stocksize pulley
Details: It's a pulley
Condition: 8,000 miles
Price: FREE if you uninstall it and reinstall my stock one
20. SOLDAMR Custom Coilovers
Details: If you don't know, they're the best coilovers. Look em up, very rare. 12k/8k. MIGHT require stock trade, probably need tophats of stock suspension
Condition: 30,000 miles
21. PENDINGCustom Fogs (Require trade)
Details: Cut up the 03 fog inserts and epoxied the fogs in. Includes wiring and TL fog button. Also includes HID kit with 3000k. I need your 03 inserts
Condition: 8/10 could use a little bondo + paint
Price: $150 + Trade PENDING
22. 03 Blacked out Headlights (Requires trade)
Details: Passenger side is a NEW unit (you can tell because it still has the rainbow coating on it. Driver side is still looking great. Blacked out corners (no amber
Condition: See above, SUPERB!
Price: $80 + 03 Headlight trade (pending condition)
If I didn't list it I guess you can ask me about it but remember to read the notice in the beginning of the post.
Last edited by lippstuh; February 28th, 2011 at 11:42 AM..
|February 22nd, 2011, 11:11 AM||#3|
|March 2nd, 2011, 04:59 PM||#11|
|Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)|