|January 31st, 2012, 09:15 PM||#1|
Electric Autometer Phantom Shortsweep Water temp gauge with senor/adapter
Everything for $50. Please pay for shipping.
This is an electric Autometer (52mm size) Phantom short sweep analog gauge. Comes with everything except the additional wiring you'll need for hook up into the cab. Works well. Only problem I see is that the gauge needs a back light for easy night viewing. Details and info on the bulb and socket can be found here: Auto Meter
I also have the upper radiator hose for the 3.0 liter with a hose adapter installed. Please see pictures and vid below.
Details and installation instructions on the gauge can be found here: Auto Meter
Details and installation instructions on the radiator hose adapter can be found here: Auto Meter
Extra hardware included (hose clamps, grounding wire and terminal connections)
I polished the threads and sensor up so no accumulations present.
Grounding point for the sensor. Lead a wire to engine or frame.
Here was the original bulb/socket but its clip-ends are broken and needed to be rigged up in place using foil tape.
Sorry for the sideways pic. This is with the light installed inside the cab. The bulb as a colored rubber coating for user appeal. I will include the two colors that came with the gauge (green and red)
And the video...
Staging a work lamp directly over the sensor (thermistor). Wired to gauge (thru signal wire). Supply and ground wires lead from the 6V source to gauge connects.
[ame=http://www.youtube.com/watch?v=7eSZULzJj40&context=C3bcd304ADOEgsToPDskIv zH8S7y7SNVcSkUv4smx4]Water temp sensor/gauge test - YouTube[/ame]
|Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)|