Custom J35 engine for 7th gen - Honda Accord Forum : V6 Performance Accord Forums
Ribbon Banner

Go Back   Honda Accord Forum : V6 Performance Accord Forums > V6P MARKETPLACE > CLASSIFIEDS
Register FAQ Members List Calendar Mark Forums Read Insurance
V6Performance.net is the premier Honda Accord Forum on the internet. Registered Users do not see the above ads.
Like Tree6Likes

Reply
 
LinkBack Thread Tools Display Modes
Old August 29th, 2012, 01:35 PM   #1
J35 6Spd
 
Join Date: Sep 2006
Location: Washington DC
Posts: 6,107
Custom J35 engine for 7th gen

For sale/ Trade+$: Custom J35 direct swap for 7th gen:

J35 engine, runs great, no issues. Custom build by Paul. My only reason for selling is that I am planning to sell the car in the near future.

I have run this engine in my car for 3 years now, about 30k miles. The engine has been babied, as I don't drag race. Only two autocross events, which are much less stress on the engine than drag. Otherwise, I rarely ever rev the engine over 4000 rpm.

All oil changes performed under my supervision at 5000 miles or less. Multiple valve lash adjustments and compression tests have been performed over the 3 years to ensure top engine performance.

Pictures of the engine when built coming soon.
This picture shows the intake manifold, valve covers, and custom powdercoated V2 intake. The small breather filter is no longer on the front valve cover:


Engine has the following items/features:

Complete port and polished, and widened, intake runners
-RL pistons (high compression)
-TL-S camshafts
-TL-S exhaust valve springs (increased engine protection in overreving)
-Fully powdercoated: black block and heads, red valve covers
-RDX injectors
-Hand polished intake manifold and painted intake manifold cover.
-MDX spacer milled by Paul
-Unorthodox racing aluminum crank pulley (includes necessary belt)
-Fuel pressure regulator w/ custom fuel rails and full return fuel system (rails need minor repair before installation- new O ring)
-Full grounding kit - custom made by Paul
-AEM FIC 6 management w/boomslang harness - street tuned for daily driving
-Stainless steel hardware on a majority of the engine surfaces
-Stainless steel radiator hoses (shown in pic above)
-Comptech aluminum oil cap (shown in pic above)
-custom made alumium knob dipstick (not shown in pic above)


To the buyer, I will also include the following items free:
-AEM wideband O2 sensor custom modified by me to display only numbers (no large dial)
-Richies J pipe (version 1) with bung for O2 sensor
-Cored pre-cats in exchange for stock pre-cats
-AEM V2 intake custom powdercoated red by Paul to match valve covers (see pic above)

I also have Innovative motor mounts for an extra $150.

I am not selling the transmission. Also, I am running the stock exhaust except for pre-cat deletes (cored stock precats) and Richie's J pipe, so I do not have a custom/aftermarket exhaust to offer.

I will credit the buyer if they have a stock J30A5 (from 06-07 accord) to trade. I can also trade for a J30A4 if it is in great condition. For engines in good condition, w/no problems and 80-100k miles, I will pay Paul's installation fees, so the price will be $3000 installed.

Please note that for trading your engine, if you have an Automatic engine, I will have to keep my polished intake manifold. It will not be compatible in an automatic, and I also need the manual IM.

The engine swap can be arranged at Paul's house. I will discuss his installation costs with the buyer (which will be waived for J30 trade), and we should be able to complete the swap in one (full) day.

Price: $3000 firm for all of the features listed above, motor mounts will be an additional $150, and you may obtain brand new mount inserts for free I believe from Innovate.

Please note that this price does not include installation costs, which are set by Paul and I will discuss with the potential buyer.

I am located in Northern VA, as is Paul.

Payment in cash or by paypal. Payment via Paypal requires an extra $50 (half of the paypal fee for $3000).

I will require a $300 (10%) deposit at the time of our agreement to buy/swap. The rest will be due at the time of installation, and Paul's installation costs will also be due at the time of installation. If I back out of the swap, the deposit will be refunded in full.

With school, my time is very limited, but I will make every effort to have the swap completed within a month of receiving the deposit.



FINALLY, I also have the RL 4 piston big brake kit and Tein SS coilovers which can be negotiated for with the engine buyer at a great price if desired. Otherwise, I won't be selling the coils or brakes until after the engine has gone. Please don't contact me for those individual items at this time, as this offer is only open to the engine buyer.

Last edited by Kschwiggy; August 30th, 2012 at 11:25 AM..
Kschwiggy is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old August 29th, 2012, 01:53 PM   #2
Slammed & Stunning
 
MatthewYu's Avatar
 
Join Date: Dec 2009
Location: Bay Area
Posts: 3,496
Send a message via AIM to MatthewYu
Kschwiggy likes this.
MatthewYu is offline   Reply With Quote Quick reply to this message
Old August 29th, 2012, 02:12 PM   #3
Herp derp
 
civicdrivr's Avatar
 
Join Date: Aug 2008
Location: VA
Posts: 648
Great price. GLWS.
Kschwiggy likes this.
civicdrivr is offline   Reply With Quote Quick reply to this message
 
Old August 29th, 2012, 02:31 PM   #4
✔ Verified Member
 
otsb708's Avatar
 
Join Date: Feb 2007
Location: Santa Barbara, CA
Posts: 5,836
Send a message via Yahoo to otsb708 Send a message via Skype™ to otsb708
Sad to see it go, Kai. GLWS.
Kschwiggy likes this.
otsb708 is offline   Reply With Quote Quick reply to this message
Old August 29th, 2012, 04:24 PM   #5
Registered User
 
Join Date: Jan 2009
Posts: 299
Any chance you would sell or trade the car as is?
lavalleemike222 is offline   Reply With Quote Quick reply to this message
Old August 29th, 2012, 04:51 PM   #6
Registered User
 
Join Date: Dec 2008
Posts: 1,158
Did you ever dyno it?
funkbro2 is offline   Reply With Quote Quick reply to this message
Old August 29th, 2012, 05:56 PM   #7
J35 6Spd
 
Join Date: Sep 2006
Location: Washington DC
Posts: 6,107
Quote:
Originally Posted by funkbro2 View Post
Did you ever dyno it?
I did.. the dyno came in at 265 whp, 248 tq. However, keep in mind the the exhaust was stock (including stock precats), except for Richie's J pipe, and the FIC was not dynotuned (only street tune for daily driving). So, the numbers would be much higher for someone who puts a proper exhaust on and tunes for performance. The purpose of that dyno was to get an idea of the engine's before exhaust upgrades and tuning, which I never got a chance to do.

See dyno sheet here (first post) http://www.v6performance.net/forums/...6k-beware.html

* The dyno was performed in 2007.. on a J35 with the setup stated above, but not this particular J35. This engine being sold was built in April 2009.

Last edited by Kschwiggy; August 29th, 2012 at 08:05 PM..
Kschwiggy is offline   Reply With Quote Quick reply to this message
Old August 29th, 2012, 05:59 PM   #8
J35 6Spd
 
Join Date: Sep 2006
Location: Washington DC
Posts: 6,107
Quote:
Originally Posted by lavalleemike222 View Post
Any chance you would sell or trade the car as is?
not ready to get rid of the car yet, unless it's a deal I could not refuse
Kschwiggy is offline   Reply With Quote Quick reply to this message
Old August 29th, 2012, 06:55 PM   #9
Registered User
 
Join Date: Dec 2008
Posts: 1,158
Quote:
Originally Posted by Kschwiggy View Post
I did.. the dyno came in at 265 whp, 248 tq. However, keep in mind the the exhaust was stock (including stock precats), except for Richie's J pipe, and the FIC was not dynotuned (only street tune for daily driving). So, the numbers would be much higher for someone who puts a proper exhaust on and tunes for performance.

See dyno sheet here (first post) http://www.v6performance.net/forums/...6k-beware.html

* The dyno was performed in 2007.. on a J35 with the setup stated above, but not this particular J35. This engine being sold was built in April 2009.
Great info for any potential buyer
funkbro2 is offline   Reply With Quote Quick reply to this message
Old August 29th, 2012, 07:36 PM   #10
Full time worker/student
 
Join Date: Oct 2008
Location: South Mississippi
Posts: 493
Plan on selling your custom s2k gauge cluster??
GLWS
FoXD!e is offline   Reply With Quote Quick reply to this message
Old August 29th, 2012, 08:02 PM   #11
J35 6Spd
 
Join Date: Sep 2006
Location: Washington DC
Posts: 6,107
Quote:
Originally Posted by funkbro2 View Post
Great info for any potential buyer

I have nothing to hide about it, any questions are welcomed

Quote:
Originally Posted by FoXD!e View Post
Plan on selling your custom s2k gauge cluster??
GLWS
nope. It's in pieces at the moment since I started upgrading it last summer. Before I sell the car, I will have it up and running again, and then will probably keep it after selling the accord to use in my (eventual, hopeful) kit car for autocrossing/tracking

My Defi blackface guages will be for sale though... those will come later after selling the engine.
Kschwiggy is offline   Reply With Quote Quick reply to this message
Old August 30th, 2012, 05:16 AM   #12
DAT Dewd from Dallas MANG
 
Join Date: Sep 2008
Location: Dallas,Texas
Posts: 1,533
yo...

call me or pm me....

I got cash in hand...need to know what labor will run me....
bdbconcepts is offline   Reply With Quote Quick reply to this message
Old August 30th, 2012, 06:09 AM   #13
Carpe Diem
 
ikethegreat's Avatar
 
Join Date: May 2008
Location: Baltimore
Posts: 3,957
I thought you picked up that J33 bdconcepts?
ikethegreat is offline   Reply With Quote Quick reply to this message
Old August 30th, 2012, 07:06 AM   #14
Registered User
 
Sonnick's Avatar
 
Join Date: Aug 2005
Posts: 4,828
^ He wants more
Kschwiggy likes this.
Sonnick is offline   Reply With Quote Quick reply to this message
Old August 30th, 2012, 07:27 AM   #15
J35 6Spd
 
Join Date: Sep 2006
Location: Washington DC
Posts: 6,107
Quote:
Originally Posted by bdbconcepts View Post
call me or pm me....

I got cash in hand...need to know what labor will run me....
PM sent. PM me your phone number if you want to take to txt messages instead!
Kschwiggy is offline   Reply With Quote Quick reply to this message
Old August 30th, 2012, 09:56 AM   #16
Registered User
 
Join Date: Jan 2012
Posts: 28
pm'd
DaSaNi10 is offline   Reply With Quote Quick reply to this message
Old August 30th, 2012, 10:47 AM   #17
J35 6Spd
 
Join Date: Sep 2006
Location: Washington DC
Posts: 6,107
Quote:
Originally Posted by DaSaNi10 View Post
pm'd
pm replied!
Kschwiggy is offline   Reply With Quote Quick reply to this message
Old August 31st, 2012, 11:32 AM   #18
J35 6Spd
 
Join Date: Sep 2006
Location: Washington DC
Posts: 6,107
daily bump
Kschwiggy is offline   Reply With Quote Quick reply to this message
Old September 1st, 2012, 06:25 AM   #19
DAT Dewd from Dallas MANG
 
Join Date: Sep 2008
Location: Dallas,Texas
Posts: 1,533
Quote:
Originally Posted by ikethegreat View Post
I thought you picked up that J33 bdconcepts?
Never went thru....

Someone else got it....
bdbconcepts is offline   Reply With Quote Quick reply to this message
Old September 3rd, 2012, 08:39 AM   #20
J35 6Spd
 
Join Date: Sep 2006
Location: Washington DC
Posts: 6,107
labor day bump
Kschwiggy is offline   Reply With Quote Quick reply to this message
Old September 4th, 2012, 04:41 AM   #21
DAT Dewd from Dallas MANG
 
Join Date: Sep 2008
Location: Dallas,Texas
Posts: 1,533
yo...

this Thursday this deal will be locked up!!!
Kschwiggy likes this.
bdbconcepts is offline   Reply With Quote Quick reply to this message
Old September 4th, 2012, 02:11 PM   #22
SK8 OR DIE
 
invsblduck's Avatar
 
Join Date: Dec 2010
Location: Santa Barbara
Posts: 697
GLWS Kai/Bobby.

Kai you can't really detail an engine bay much more than you have bro....makes me realize how far I have to go. Thanks for all the inspiration

Kschwiggy likes this.
__________________
Rockin' a Smalser J36 w/6MT swap
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
invsblduck is offline   Reply With Quote Quick reply to this message
Old September 4th, 2012, 02:18 PM   #23
J35 6Spd
 
Join Date: Sep 2006
Location: Washington DC
Posts: 6,107
Update:

Had the oil change performed over the weekend and did a visual inspection of everything above and below. There was some oil seeping from between the engine and transmission housings - rear main seal needs to be replaced which will be done during the swap with a new OEM part. Otherwise, everything looked great.

Also, the accessory belt is starting to show signs of wear. I will be ordering a new Gates belt (sized for the underdrive pulley) to be installed during the swap.
Kschwiggy is offline   Reply With Quote Quick reply to this message
Old September 5th, 2012, 04:36 AM   #24
DAT Dewd from Dallas MANG
 
Join Date: Sep 2008
Location: Dallas,Texas
Posts: 1,533
i need your paypal info....
bdbconcepts is offline   Reply With Quote Quick reply to this message
Old September 5th, 2012, 09:57 AM   #25
J35 6Spd
 
Join Date: Sep 2006
Location: Washington DC
Posts: 6,107
pm sent.
Kschwiggy is offline   Reply With Quote Quick reply to this message
Old September 8th, 2012, 04:40 AM   #26
DAT Dewd from Dallas MANG
 
Join Date: Sep 2008
Location: Dallas,Texas
Posts: 1,533
yo...




I am so excited!!!!!!
bdbconcepts is offline   Reply With Quote Quick reply to this message
Old September 8th, 2012, 06:30 AM   #27
Registered User
 
Join Date: Jun 2010
Location: Washington, DC
Posts: 652
Good deal indeed, good luck to both of you.
DCdonDubby is offline   Reply With Quote Quick reply to this message
Old September 8th, 2012, 08:45 AM   #28
Registered User
 
Join Date: Aug 2009
Location: KS
Posts: 843
Was this engine built from your original J30?
gwiffer is offline   Reply With Quote Quick reply to this message
Old September 8th, 2012, 12:07 PM   #29
DAT Dewd from Dallas MANG
 
Join Date: Sep 2008
Location: Dallas,Texas
Posts: 1,533
Quote:
Originally Posted by gwiffer View Post
Was this engine built from your original J30?
no...

J32a3...
bdbconcepts is offline   Reply With Quote Quick reply to this message
Old September 8th, 2012, 12:33 PM   #30
Registered User
 
accord325's Avatar
 
Join Date: Jul 2012
Location: Tampa
Posts: 2,393
Damn, Wish I had $3000 and time to drive to VA. Best of luck.

Is Paul still doing the Intake Manifold Spacer ? If so, Paul, please contact me! I'm new to the forum and dont want to put 15 meaningless post in just to contact. Thanks
accord325 is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Reply


Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Honda Accord Forum : V6 Performance Accord Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:
Chapter
Choose your AV6 Chapter Location
Ride
What do you drive?
Insurance
Please select your insurance company (Optional)

Log-in


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On