|May 25th, 2007, 01:26 PM||#1|
FS: Custom J32a2 Crower Rods and CP Pistons
Got some custom stuff up for sale.
Selling parts off the motor I was having built previously.
The parts up for grabs right now is the piston and rod set.
Originally I paid $1200for the rods and $875 for the pistons.
The rods are by Crower and the pistons are by CP which both are very respectable companies.
These parts were blueprinted(measured, etc) by a professional race engine shop here in Maryland.
The rods were made based on a set of rods from the J32a2(type S motor) and the pistons from a
TL-P set of pistons. The pistons do mount to the rods and the pistons can work in a
Type S motor, however the valve relief would need to be a little bigger since the
Type S has a little larger valve.
I'm looking for $1150 shipped
Please serious inquires only and let me know if you have any questions ..just pm me
I have included some pics.
Pic of the stock rod(to the right) vs the crower rod(to the left)
Here is a pic of one of the 6 CP pistons
The piston is setup for a 9.0:1 compression ratio. The valve reliefs on the piston is cut according to the stock TL/CL-P piston.
Last edited by blk2001tlon19s; May 25th, 2007 at 01:31 PM..
|May 31st, 2007, 04:05 PM||#5|
✠ 2nd Amendment'r ✠
Join Date: Nov 2003
Location: Hippy-town, Oregon
god damn, bump for some nice parts. I wish i could invest in these, but currently my money is going elsewhere
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|June 9th, 2007, 04:21 PM||#9|
I really don't want to split up the combo. If i split them up, I want the at least 900 for the rods almost because its will probably be all most impossible to sell the pistons imo. I want $1050 shipped total for 6 rods/6 pistons(plus a set of stock j32a2 rods). Again, the pistons cost me $875 and the rods cost me $1200. Neither item has been used or installed. They are still in the CP & Crower boxes.
|June 11th, 2007, 11:50 PM||#12|
Join Date: Jun 2003
Location: Chicago 'burbs
Highly recommend this seller The custom parts are top quality.
|June 12th, 2007, 04:24 AM||#13|
Join Date: Aug 2003
Location: So Cal (562)
So you were the one I saw on ebay trying to sell these parts
You can split the combo. Personally I would get the pistons for a 3.5 build. Other part of the deal wouldn't be easy since who wil buy just the rods?
Anyway good luck
|Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)|