|November 4th, 2012 07:03 PM|
|November 4th, 2012 06:07 PM|
|zetaroy||I use this thread for reference. Good luck. http://www.v6performance.net/forums/...y-coupe-3.html|
|November 3rd, 2012 07:51 PM|
|bigbird||Damn, where were you a few days ago? Bought some load resistors but they didnt require me to really cut anything. I am having trouble doing the front turn signals. Between the red/black, brown and black wires I cant tell which is the flashing wire...any help?|
|November 3rd, 2012 07:06 PM|
Maybe try these. At least you won't have to splice. 7440 LED Hyper Flash Fix Wiring Adapters For Turn Signal Lights
|October 30th, 2012 04:47 PM|
|bigbird||After looking around some more it looks like it has to be load resistors after all.|
|October 29th, 2012 01:05 PM|
I looked into this a while ago; I remember reading something about modding the stock Omron/Orion? flasher under the dash by adding a resistor. I was having a hard time wiggling up under the dash to try and pry it off, so I gave up.
+1 for trying to figure this out
|October 29th, 2012 12:35 PM|
LED Flasher Relay/Unit?
Hey guys, Was looking into converting my brake and turn signals to LED but really didn't want to get load resistors for each bulb. I was trying to find an LED compatible Flasher Unit/Relay but I can't find one that matches the stock unit/relay. I read here that is the best solution but no luck on a part number or something to really look for. Is there one available or should I just go with the load resistors?