Accord V6 Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
41 Posts
Discussion Starter #1
I just bought OEM style CF hood. it fights but it doesnt fit prefect. 1 side go goes up and when i drive it shakes. Any know what to do? would pins press my hood down?
 

·
SD's Panda
Joined
·
1,325 Posts
if one side is lifting you can try adjusting the hood latch on the car to see if its lining up with the latch on the hood if its not perfect it can sometimes make the hood tilt one way when closed. also try adjusting (up or down) the rubber "cushion" on the left and right on the radiator support.
 

·
b20vem1
Joined
·
626 Posts
mine use to be like that it was moving up and down. i found out it was the hangar part that attaches to the car. the cf hood latch diameter is too thin. i had to wrap some duck tape to it to make it stop bouncing up and down
 
1 - 9 of 9 Posts
Top