Accord V6 Forum banner

Status
Not open for further replies.
1 - 20 of 205 Posts

·
jinsoku.com
Joined
·
5,934 Posts
Discussion Starter #1 (Edited)
this is what i have left...

OEM Rear Lip
this is already painted satin silver to match the car. it is custom fitted onto an 01-02 rear bumper, so taking it off would show the holes on my bumper. i would need again to swap with another local rear bumpers. you would get my bumper and oem rear lip and i would get your rear bumper which needs to be painted satin silver as well.
$75 + trade OBO

J’s Racing Rear A-Pillar Bar
rare a-pillar bar made by j's racing. there were only a batchful made for our cars because so these are a limited edition item. in very good condition. i am in need of your plastic pillars since i installed my bar the "functional" way. my bar is actually mounted to the body of the car and not just over the seatbelts...meaning there are two neatly cut holes for the bar to mount to the frame.
$120 + trade OBO





JLine 5RL3 18” 3 Piece Custom Wheels w/ Dunlop SP Sport Maxx 225/40/18 Tires
these were custom made for me since jline doesnt make wheels until they are ordered. they are 18x7.5. they have a 45+ offset. they are 5x114.3. they are the color "anthracite" which is just gunmetal. these are 3 piece forged wheels that weigh less than the tire that is wrapped around it. they are in extremely good condition, which means no scratches, bends, cracks, curbs, or anything. these took me 3 months or so to get. feel free to check www.jlinewheels.com for the pricing and quality. these wheels retail for $844 per wheel totaling up to about $3300. these are wrapped in Dunlop SP Sport Maxx 225/40/18 tires that have about 60% or so tread left. these tires retail for about $300 PER tire.
$2500 OBO



 

·
jinsoku.com
Joined
·
5,934 Posts
Discussion Starter #2 (Edited)
part 2

Power Slot Slotted Rotors
these were used for less than a year and are in good condition. i went with only slotted because of all of the stories about people having cross drilled rotors cracking on them. these do not have cracks and will not crack. they are oem size.
$90 for the front rotors OBO



Honda Accord I4 Leather Shift Boot
had this custom fitted on my v6 shifter. not hard to do. its leather.
$20 OBO



Ractive Instrument Cluster Bezel
not painted. good condition.
$10 OBO



Sony Xplode XS-V6920 6”x9” Speakers
better than stock speakers. they worked well for me. 3 way speakers. max input power is 200w.
$25 OBO
 

·
jinsoku.com
Joined
·
5,934 Posts
Discussion Starter #4 (Edited)
part 3

Razo RA93 Carbon Fiber Shift Knob
this is aluminum and carbon fiber.
$45 OBO

Custom Trunk Hideaway for Subwoofer
this was made for my kicker subwoofer, so i dont know if this is any use to anyone. it pretty much makes it the trunk area a little bit better.
$15 OBO



Kenwood Excelon Stereo Setup (screen, navi, surround sound, dvd/cd, tv, etc.)
included in this package is the:
* Kenwood KDS-P900 5.1ch DVD Surround Processor
* Kenwood KNA-DV2100 Navigation System
* Kenwood KVT-910DVD Head Unit
the head unit is a motorized touchscreen 6.5" lcd screen that can play dvd's and cd's. it comes with the remote. the surround processor creates surround sound by recognizing dobly digital, mpeg, and dobly pro logic and gives you that theater sound. you dont have to put a navi disc into the headunit whenever you need to find a place since its always in the brain. the navi comes with its own navi speaker which talks to you. the navi will come with a map disc. this set up comes with the tv tuner and antennas, which allows you to watch all of the local tv channels. this set up is able to play mpgs so you can burn your favorite videos and have them be able to play. this comes with all of the harnesses and wiring it needs for everything to work. i will be basically converting back to stock so i do not need any of the harness or wires. this is a good combo since you would have had to buy all of these components separately.

$600 OR BEST OFFER

headunit:











dvd receiver:





sound processor:





navi:





center channel speaker:



1 of 2 tv tuner attennae:

 

·
MARTIN
Joined
·
1,411 Posts
hey do you think I could meet you up some time this week?
 

·
jinsoku.com
Joined
·
5,934 Posts
Discussion Starter #6
dibs on cf eyebrows! why parting?
youre talking about the brand new ones right?

just to let everyone know...i dont really do dibs. its first come, first serve...whoever gives me the money first.

oh and im parting out because i got a really good deal from my friend for a 350z. my cars getting old...110k miles old. if i dont take up this offer from my friend, ill probably be stuck with my av6 for a few more years than i want to.
 

·
MARTIN
Joined
·
1,411 Posts
yeah I have cash on hand to pick it up and all that, so let me know, my number is 510-390-4738...maybe monday to pick up around 8am?

EDIT...how about tomorrow morning?
 

·
jinsoku.com
Joined
·
5,934 Posts
Discussion Starter #9
yeah I have cash on hand to pick it up and all that, so let me know, my number is 510-390-4738...maybe monday to pick up around 8am?

EDIT...how about tomorrow morning?
i have work tomorrow from 9-5. monday morning i have school from 12-2 and work from 5-930. if you can catch me anytime but these. i can meet up with you. sorry for the non-flexibility.
 

·
MARTIN
Joined
·
1,411 Posts
Its all good, I may take the cf gas cap off of you too, how about monday i'll be in davis at 9am? pm your number so I can call you tomorrow so we can make plans for it, thanks!
 
1 - 20 of 205 Posts
Status
Not open for further replies.
Top