Accord V6 Forum banner

1 - 20 of 23 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter #1
I'm selling my car, going back to stock, and I have the following items for sale. These parts are for 7th Gen only, have all receipts:

ALL PRICES ARE IN CANADIAN $$. SHIPPING IS NOT INCLUDED.


1. AEM V2 CAI: used for 4 months, will let it go for $250

2. Custom high performance downpipe: used for 3 months, cost me over $1200 to be made. This custom setup replaces all your cats. Comes with 2 brand new O2 simulators, paid over $80. These simulators are used so that CEL wont come on. This is the same setup Tman had on his car. Dyno showed it gained over 29hp at the wheels plus major torque increase. First $900 takes!!

3. Koni Yellow Shocks (4): used for 3 months only, lifetime warranty, paid over $1100, will let go for $850.

4.Tanabe Springs model DF210, used for 3 months only, first $190 takes them including original box. Will work on 7gen only 4 and 6 cylinders!

5. H&R Sport Springs: used for 3 months only, first $140 takes them. Will work on 7gen only 4 and 6 cylinders!

6. Comptech Rear Sway Bar: used for 3 months only, first $130 takes.
7. Brand New TL Front Sway Bar: Never used, first $70 takes
Buy both Comptech and TL sways and will sell for $180


8. Sun Automotive Hyper Ground Wires & Voltage Regulator: used for 1 month only, first $270 takes

9. MOMO Carbon Flbre Shifter: Brand New, never used, paid $120, first $70 takes

10. APEXi V-AFCII: used for 2 weeks, Black housing with smoke display trim, dash mounting hardware included. First $350 takes

http://images.cardomain.net/products/apx/APX401A915_2.jpg

11. 9006 HID 6000K KIT, 160 hours use - rated for 2500+ hours, first $350 takes


Please call me at 604-312-0969 or e-mail me at [email protected] for quicker response
 

·
CG1 Driver
Joined
·
797 Posts
Brand New TL Front Sway Bar- does this work for 6th gen? and can i get a pic? and does the vafc work for the 6th gen too?
 

·
Registered
Joined
·
21 Posts
Discussion Starter #5
ATran said:
Brand New TL Front Sway Bar- does this work for 6th gen? and can i get a pic? and does the vafc work for the 6th gen too?
Not sure if TL sway will work on 6th gen. I can check but I doubt it.

V-afc is compatible with Honda's I-VTEC motors, as well as VTEC motors. It will definitely work on your car

More info:
V-AFCII is A'PEXi's next-generation digital fuel computer and combines advanced fuel management functions with a VTEC engagement controller. It features a user-definable, sixteen-point, adjustable fuel curve that can be set in 500 RPM increments. The range of fuel adjustment is +/- 50% at each of the user-defined setting points. The fuel adjustment function considers wide/narrow throttle and low/high camshaft settings, from which four different fuel maps are created (wide-low, wide-high, narrow-low, narrow-high). The integrated VTEC Controller adjusts the point at which the engine switches from the low to high cam during acceleration, as well as when the engine switches from the high to low cam during deceleration. The new jog dial and center joystick controls glow green or red to indicate which cam mode the engine is in. It is compatible with Honda's I-VTEC motors, as well as VTEC motors.
 

·
Registered
Joined
·
554 Posts
rbarrena said:
I'm selling my car, going back to stock, and I have the following items for sale. These parts are for 7th Gen only, have all receipts:

ALL PRICES ARE IN CANADIAN $$. SHIPPING IS NOT INCLUDED.


1. AEM V2 CAI: used for 4 months, will let it go for $250

2. Custom high performance downpipe: used for 3 months, cost me over $1200 to be made. This custom setup replaces all your cats. Comes with 2 brand new O2 simulators, paid over $80. These simulators are used so that CEL wont come on. This is the same setup Tman had on his car. Dyno showed it gained over 29hp at the wheels plus major torque increase. First $900 takes!!

3. Koni Yellow Shocks (4): used for 3 months only, lifetime warranty, paid over $1100, will let go for $850.

4.Tanabe Springs model DF210, used for 3 months only, first $190 takes them including original box. Will work on 7gen only 4 and 6 cylinders!

5. H&R Sport Springs: used for 3 months only, first $140 takes them. Will work on 7gen only 4 and 6 cylinders!

6. Comptech Rear Sway Bar: used for 3 months only, first $130 takes.
7. Brand New TL Front Sway Bar: Never used, first $70 takes
Buy both Comptech and TL sways and will sell for $180


8. Sun Automotive Hyper Ground Wires & Voltage Regulator: used for 1 month only, first $270 takes

9. MOMO Carbon Flbre Shifter: Brand New, never used, paid $120, first $70 takes

10. APEXi V-AFCII: used for 2 weeks, Black housing with smoke display trim, dash mounting hardware included. First $350 takes

http://images.cardomain.net/products/apx/APX401A915_2.jpg

11. 9006 HID 6000K KIT, 160 hours use - rated for 2500+ hours, first $350 takes


Please call me at 604-312-0969 or e-mail me at [email protected] for quicker response
got any pics of hids and do they plug into stock lights?
 

·
Registered
Joined
·
21 Posts
Discussion Starter #8
ATran said:
damn i want that vtec controller. but kinda expensive. PM me or something.
It's $350 Canadian which is about $290 USD. I paid $450 Canadian plus tax. This unit was in my car for 2 weeks. It's in mint condition.
 

·
Registered
Joined
·
21 Posts
Discussion Starter #9
DeezV604 said:
got any pics of hids and do they plug into stock lights?
Don't have any pics but yes they plug into stock lights. I can get pics if you want.
I paid over $600 Canadian plus tax.
 

·
Registered
Joined
·
554 Posts
rbarrena said:
Don't have any pics but yes they plug into stock lights. I can get pics if you want.
I paid over $600 Canadian plus tax.
pics would be cool. thx
 

·
Registered
Joined
·
1,171 Posts
$850 CAN for Koni Yellows? Someone just posted the other day that you could get those for $450 US!
 

·
Registered
Joined
·
21 Posts
Discussion Starter #12
For a 7th gen accord? Doubt it, but hey if you can get them at that price buy them. Get me the name of the shop b/c I'll buy some too.
 

·
I AM LOST....
Joined
·
4,681 Posts
sorry, not to jack up your thread..

but such bad timing to sell.. canadian dollar had being strong and selling to US means US buyer have to shell out more US $ to get it.. not to mention the higher shipping rate, and possible custom tax..

ie AEM for $250 cdn is $203 US based on XE.com's trading value.. brand new one is only like $240 on ebay i believe..

i suggest you try the local honda forum instead... or try to sell to canadian first..
 

·
KNIGHTRIDER
Joined
·
1,237 Posts
Buyers:Hey guys heres a link to see the exchange amount of Canadian dollars to US dollars, the stuff still comes out real pricey, then there will be shipping from Canada which is pricey too.

http://www.gcitrading.com/CONVERTER.htm

Seller:
Sorry to say you should lowers prices alot more to get any sales from V6p, also alot of people here are cheap and always through low offers, if your trying to make even or come out close this not the site to do so and lastly alot of your stuff can be bought brand here in the state for the same prices. Sorry ; - (
 

·
Registered
Joined
·
21 Posts
Discussion Starter #16
Who the f do you think you are? You are way out of line. Where do you come from? This is the most negative response i have seen from anyone since i joined this site. This will be reported to administrators. I have purchased items from this site and have had very good rapport with other sellers. The way it works is, if you don't like the price you can make an offer or you don't have to buy. Trashing a sellers post and stating that all V6performance members are cheap low ballers is totally disrespectful and tells me that you are a moron. Buyers on this site have much more integrity and respect than you. They are not stupid. They are aware of exchange rates and shipping costs. On the other hand you have proven that you have no respect for anyone on this site. You need to learn how we do business on this site. In the mean time do us all a favour and find another site to evangelise your BS.
 

·
Registered
Joined
·
1,171 Posts
Sorry rbarrena but sunnyincali is right- I don't think his post is disrespectful at all. Perhaps he shouldn't have bothered posting as you are right as well- if someone wants something they'll post, if not oh well. Which is why I didn't bother to tell you that you're prices are way too high for this market as well (well I did mention the konis which I thought were way up there).

I think what we're trying to say (that is brex, rbarrena and myself) is that you're highly unlikely to sell that stuff at those prices due to the conditions of the market and the typical v6p buyer (cmon who doesn't want to pay minimum dollar?). You might be better off on ebay or local.
 

·
KNIGHTRIDER
Joined
·
1,237 Posts
hey man chill out! im was tryn to help you out, obviously you havn't been on this site long enough to know how many people work on this site. im not tryn to dis you man i just was nicely tryn to let u know that the prices you want, you may not get because again people here through low ball offers. im pretty sure i was politley let'n you know that but i guess not. anyways sorry but you owe me an apology and thanks to the homie who got my back. we all v6 homies here if you got beef you need grill it up and eat it we all one big v6 family here dog.
 
1 - 20 of 23 Posts
Top