Accord V6 Forum banner
1 - 15 of 15 Posts

·
James
Joined
·
1,095 Posts
Discussion Starter · #1 · (Edited)
Hey guys so I sold my 9th Gen v6 after returning to stock and have a few things parts leftover.

If someone in the NYC/Greater NY area is willing to pickup, I'll make them an outstanding deal on all the stuff together. Otherwise I'm willing to ship the smaller things, buyer pays shipping. All prices negotiable, I'm not in a huge rush to move the parts but I'd rather someone be using them then just have them sitting around.

Disclaimer: These parts were on my car for just about 2 years give or take a few months for some of them and they aren't shiny or even clean but there are absolutely no functional issues with any of them. Please excuse the dirt and dust that has accumulated over time.


SOLD SOLD SOLD First up is a Takeda Polished Axle Back Exhaust - Great shape, some corrosion on the flange but nothing earth shattering. This exhaust sounds fantastic and has no leaks. It was on my car for almost 20 months and during that time was never raspy nor was excessive drone an issue. 500 picked up, I don't anticipate shipping this, that would be prohibitively expensive.









SOLD SOLD SOLD Takeda Black Short Ram Intake - The filters could use a scrubbing but everything works fine. Included are the hoses that replace the stock coolant tubes, already cut to size. This is not typically included in the Takeda kit, you have to make your own. Comes with two filters one dry, one oiled. Will throw in air filter cleaning solution as well. 125






P2R Throttle Body Spacer - Red, with 2 thermal gaskets and the extended lugs 50





Worth noting: The burn in marks on the thermal gaskets is going to happen no matter what, that is not a sign of a compromised gasket.


P2R Intake Manifold Spacer - Silver, with 2 thermal gaskets and the extended lugs 65




SOLD SOLD SOLD OEM All Weather Mats - They're rubber mats, great shape. 70







SOLD SOLD SOLD Progress 22mm Rear Sway Bar - Brand new never installed. Comes with all necessary hardware minus one nut that can easily be replaced from any hardware store. Must have been a manufacturer error because this is brand new never used/ 70





I forgot to photograph these last few parts hence the crumpled up paper. Sorry about that.


Thanks for looking and don't be shy with the offers. Worst I can say is no!
 

·
James
Joined
·
1,095 Posts
Discussion Starter · #6 ·
Ok guys still holding out on local sales, hoping to get this stuff moved, looks like the exhaust is out the door... make me offers for pickup, trying to avoid shipping larger parts
 

·
James
Joined
·
1,095 Posts
Discussion Starter · #10 ·
Hey guys, everything has now been sold besides the P2R Gaskets and Spacers. If anyone is interested in those parts shoot me an offer! Thanks again
 

·
James
Joined
·
1,095 Posts
Discussion Starter · #13 ·
Wondering if you still have the
P2R Intake Manifold Spacer - Silver, with 2 thermal gaskets and the extended lugs 65

Interested. Have cash.

Thanks,
Mark
Back from the dead here.. I could take a look in my parents garage next time I’m over there. Not sure what became of those parts over the years.. I’ll check back here to see if you still want me to for a few days…
 
1 - 15 of 15 Posts
Top