Accord V6 Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
72 Posts
Discussion Starter #1
Ok guys and gals. Here's the deal. I goofed when I took the measurements in building these headlamps. The passenger side headlamp is touching the ABS unit on my car. So, if you have a 4 banger LX, you should be ok. I spent way too much time and being totally anal when building this set of headlamps. Below are the details. My loss, your gain!

Price: $300 (firm) for the pair

Specs: E-39 ECE (euro) bi-xenon projectors

What you need: 2 ballasts and 2 D2S bulbs

Pics: http://f2.pg.photos.yahoo.com/ph/benben01/lst?.dir=/HID+Project&.view=t

-Ben.
 

·
8th World Wonder
Joined
·
1,245 Posts
But they won't fit in a V6 engine bay? Or they don't fit the I4?
 

·
Registered
Joined
·
72 Posts
Discussion Starter #5
if u have abs, it's gonna rub against the abs unit regardless if it's a 4 or 6 banger, assuming the abs unit is on the passenger side
 

·
Registered
Joined
·
545 Posts
is it possible to dissasemble it? looks jbwelded together...maybe you can move the projectoers up closer to the plastic oem lense
 

·
Registered
Joined
·
72 Posts
Discussion Starter #9
these projectors are bmw 5 series bi-xenon euro spec. as for retrofitting, i don't plan on doing this for anyone else. it just takes too damn long.
 
1 - 9 of 9 Posts
Top