Accord V6 Forum banner

1 - 17 of 17 Posts

·
I AM LOST....
Joined
·
4,681 Posts
not standing out particularly...

hmm.. got a close up? i wanna see the material.. thanks.. :up:
 

·
Banned
Joined
·
109 Posts
Discussion Starter #3
I wanted it to look like stock. It's aluminum T6, painted aluminum. Onlinemetals.com ...an easy DIY job for $20 max.
 

·
Banned
Joined
·
109 Posts
Discussion Starter #5
if you want the bling bling, you'll want stainless steel bars, then sand the crap out of them until they shine.
 

·
Registered
Joined
·
755 Posts
Genius6Spd said:
I wanted it to look like stock. It's aluminum T6, painted aluminum. Onlinemetals.com ...an easy DIY job for $20 max.
what do you mean by this?
will this place take an order to make door sills? i look at the site. there's alot of dimension and type of materials to use. and alot of technical stuff. i'm clueless :(

have you order from them before?
thanks
 

·
Banned
Joined
·
109 Posts
Discussion Starter #9
You'll have to cut it yourself to 2" x 30". I used a bolt cutter. I've ordered many things from them. You'll want to sand the edges too.
 

·
Registered
Joined
·
755 Posts
SlayerGTR said:
it would look pimp if it glows when u close the door
i was thinking about doing this. remember those playstation booth in mediaplay or gamestop etc.?

i can cut a thin peice of clear acrylic. have it engrave "Accord" on it and drill two LED's on the side. it'll lit up the word accord =D


flyvtec said:
it looks good and different...but i prefer "accord" on the door sill.
i'm pretty sure there are places that can engrave it for you.
 
1 - 17 of 17 Posts
Top