Accord V6 Forum banner

1 - 20 of 29 Posts

·
Registered
Joined
·
108 Posts
Discussion Starter #1 (Edited)
All parts are from a 2000 Integra that had a J32A2 in it.

Part out. Buy your awesome parts here.
Parts to convert an Auto J32 motor to manual (2003 CL-S spec).
14260-PGE-A11 PULLEY, FR. TIMING BELT DRIVEN 78.86
11860-PGE-A10 PLATE ASSY., FR. TIMING BELT BACK COVER 19.65
13621-PGE-A11 PULLEY, TIMING BELT DRIVE 58.96
37500-PGE-A11 SENSOR ASSY., CRANK 53.53
37501-PGE-A10 SUB-HARNESS, CRANK SENSOR 16.49
37840-PGE-A11 SENSOR ASSY., TDC (2) 119.58
37841-PGE-A10 SUB-HARNESS, TDC (1-2) 8.76
37506-PGE-A12 SENSOR, CRANK 84.06
37820-PGE-A12 CONTROL MODULE, ENGINE 735.92

All for $700








Motor is being parted out. I'd like to sell the bare shortblock complete for $250 shipped! LMK if anyone wants it to build, as a spare, or a replacement. Pistons, rods, crank, etc all included. Ran great!

Parts

Complete Intake manifold swap for other J motors, or replacement for J32. Includes manifold, TB, runners, fuel rails, injectors and thermal gasket.

$350


Brand new OEM alternator belt tensioner

$50


OEM fuel block converted to AN with block off for stock FPR. this is to run an aftermarket FPR on your J32

$30


Conversion harness for OBD2B cars

$100








More items/pics to come. Thanks
 

·
Registered
Joined
·
108 Posts
Discussion Starter #4
convert what? The motor and tranny? Or are you just trying to convert to manual? Either way you will need more parts.
 

·
Registered
Joined
·
370 Posts
Do u have the engine bay harness? Goes from the ecu to the sensors inside the engine bay. Has to be from a 03 cl-s 6spd. Lmk
 
1 - 20 of 29 Posts
Top