Accord V6 Forum banner

1 - 20 of 31 Posts

·
Houston-Imports.com :3
Joined
·
114 Posts
Discussion Starter #1
Has anyone done of these? I found one pretty cheap and was wondering what I would need.
 

·
Registered
Joined
·
294 Posts
Talk to paul. He could probably tell you all you need to know.
 

·
Registered
Joined
·
176 Posts
I was under the impression that the tranny doesn't bolt up? Or at least that is what I have read in a number of threads.

I would assume it would work if you also have a tranny coming with the j35?
 

·
DAT Dewd from Dallas MANG
Joined
·
1,533 Posts
yo...

let's clarify some things...

a j35a4 and a j35a8 both fit the

TL type S MANUAL transmission that came with a J35a8 engine....
2007-2008 ACURA TL Type S....

the older pilot and ody motors fit for the 6th gen because of sensor sets and ALSO the bell housing fits the 2003-2007 Honda 6mt accord transmission or the 2004-2206 acura tl 6mt transmission...



I hope this helps you....:p


fyi...I would go j32a3 and bore it out and use a MDX crankshaft (j36)

or buy a j35a8.....which then means you need different bell housing for the regular 6mt accord or acura tl 6mt tranny to work...or you could get a j35a8 6mt...
 

·
Registered
Joined
·
12 Posts
let's clarify some things...

a j35a4 and a j35a8 both fit the

TL type S MANUAL transmission that came with a J35a8 engine....
2007-2008 ACURA TL Type S....

the older pilot and ody motors fit for the 6th gen because of sensor sets and ALSO the bell housing fits the 2003-2007 Honda 6mt accord transmission or the 2004-2206 acura tl 6mt transmission...



I hope this helps you....:p


fyi...I would go j32a3 and bore it out and use a MDX crankshaft (j36)

or buy a j35a8.....which then means you need different bell housing for the regular 6mt accord or acura tl 6mt tranny to work...or you could get a j35a8 6mt...

Yes this help me.

I don't care about the sensor. I want to know for the bell housing.

So if I want to go MT with j35 from MDX 2004-2006 or RL 2005+ I need the MT from TL-S 07-08 ?? this same MT fit on J37 ??

THANKS ALOT for your help.
 

·
DAT Dewd from Dallas MANG
Joined
·
1,533 Posts
Yes this help me.

I don't care about the sensor. I want to know for the bell housing.

So if I want to go MT with j35 from MDX 2004-2006 or RL 2005+ I need the MT from TL-S 07-08 ?? this same MT fit on J37 ??

THANKS ALOT for your help.
yes for the j35...

for the j37 I have no idea....

also with a j35a8 you can bore it out if needed...

or you can buy a j32a3 and bore it out and use a mdx crank and rods and you now have a J36!!!!

For a 7th gen you can use the j35a8,j32a3,j35a7......
these motors have the biggest intake valves from the factory... oh so does the cl-s motor as well..
j35a1 and a4 are better suited for the 6th gen...
 

·
Registered
Joined
·
12 Posts
yes for the j35...

for the j37 I have no idea....

also with a j35a8 you can bore it out if needed...

or you can buy a j32a3 and bore it out and use a mdx crank and rods and you now have a J36!!!!

For a 7th gen you can use the j35a8,j32a3,j35a7......
these motors have the biggest intake valves from the factory... oh so does the cl-s motor as well..
j35a1 and a4 are better suited for the 6th gen...
I will go with j32a2 or 3 with TL manual transmission 2004-2006.

The crank and rods from MDX fit in the J32a2 ??
 

·
DAT Dewd from Dallas MANG
Joined
·
1,533 Posts
I know the crank and rods fit the j32a3....

i do not know if the cl-s (j32a2)is strokeable.....

you would need to ask Paul

a.k.a NVA-AV6....
 

·
Bobby Lane Racing
Joined
·
5,679 Posts
I will go with j32a2 or 3 with TL manual transmission 2004-2006.

The crank and rods from MDX fit in the J32a2 ??
If you are looking for a direct PnP Swap, J32a3.

If you are looking to swap out crank and rods, you are better off tearing down your stock engine and swapping it into that. Any engine builder with the right tools, to machine, balance, and install can do it for you.

You do not want to use a J32a2 in a 7th gen. It doesn't make sense.
 

·
Registered
Joined
·
2,771 Posts
the j35a8 is same for the auto tl-s and the 6mt tl-s i believe. 6mt tl-s are very hard to find so find an auto one and take that engine, should be the exact same.
 
1 - 20 of 31 Posts
Top