Accord V6 Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
First time post:
Pulling a J30A4/RCA-8, swapping in a J35A4/P8E16 from an ‘03 Odyssey. Hooking it up to the original 6 spd manual.
While in the change over I wanted to put in RL cams and was wondering if there is any valve clearance issues here.
If the cam works stock then I am going to follow that up with headers, Exedy clutch and a hondata tuner.

I have a ‘04 MDX J35A5/RDJ11 that I was wondering if the cams would be a good alternative to the RL.

Appreciate any thoughts.
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #3 ·
no issues it been done before.

I appreciate all your input on these forums.
I am having a hard tim sourcing a CanBus adapter and a ‘08 TL manual ECU.
Are you building adapters?
Do you have access to the ECU as well?

Build
‘04 Honda Accord w/ 6spd MT
‘04 J35A4 from an Odyssey
‘05 RL camshafts
Hondata FlashPro
Custom Headers and high flow exhaust

Thanks
 

·
Mr. Detail
Joined
·
1,157 Posts
You ever get this done? Just wondering how it runs if you did.
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #5 ·
You ever get this done? Just wondering how it runs if you did.
Still in process. Should be installing motor in the next week or two.
We decided to not do the RL cams at this point as the odyssey 3.5 is not a direct drop in. Needing some modifications to fit.
 
1 - 5 of 5 Posts
Top