Accord V6 Forum banner

j35a4 supercharged max psi

5.2K views 1 reply 2 participants last post by  HOND@CURA  
#1 ·
hi guys

im planning to install m90 supercharger on my j35a4, I'm new to Honda engines.

what is my max psi if the engine is stock?

how much hp i might get from a stock engine?

im planning to reach a 400-450 hp, is the stock engine will reach and handle 400 hp?

advice me please if i should mod my engine or not ( i wanna drive my car without worrying that my engine will blow up any time )

as im planning to do an external upgrades like injectors, headrs, fuel system, ect...

sorry im asking a lot of question, i just wanna be in the right bath

thanks
 
#2 ·
If you are serious about doing this, 400hp is not out of the question, but reliable is a different story. I have seen people turbo stock engines similar to this and with the right tune it could last forever. If you want reliability though, you should build it. Do it right the first time so you don't have to do it again. Also, 400hp with a supercharger is asking a lot for a stock block.