Accord V6 Forum banner

Problem with springs?

446 views 2 replies 2 participants last post by  03c0upe 
#1 · (Edited)
I got neuspeed springs..i was cheking the gap on the front 2 tires.one side is different than the other...on the right side i have a 2 finger gap..on the right i cant even fit 2 fingers...is this normal or what is wrong :confused:
 
#2 ·
03c0upe said:
I got neuspeed springs..i was cheking the gap on the front 2 tires.one side is different than the other...on the right side i have a 2 finger gap..on the right i cant even fit 2 fingers...is this normal or what is wrong :confused:
did you install. is it springs only. you need to take off the tire on the higher side and make sure that the bottom of the strut itself is ----all the way into the bracket it sits in -------. its that "u" shaped thing that connects to the lower contol arm on the front suspension. the strut drops into this hole that is clamped by a bolt. if you installed you know what im talking about. check it out.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top