Accord V6 Forum banner

1 - 4 of 4 Posts

755 Posts
Discussion Starter #1 (Edited)
i recently instal dension's icelink module for my ipod.

i mount it in the center storage bin. thinking i'd need to do some drilling to get a wire in there.

but i found out that at the bottom end edge of the bin there's two opening on both side. the far left and right.
it's cover over by that fabric thing at the bottom of the bin.
so all i need was to tear that fabric at the opening to run the wire through.

*sorry forgot to rotate this. bare with me

a head up for those planning to put some electronic in the bin and not wanting to do any permanent damage by drilling to the bin.
1 - 4 of 4 Posts