Accord V6 Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
217 Posts
Discussion Starter #1
If I choose to power my speakers through my 2 channel amp, how would I wire the speakers? Do I just splice into the rear speaker wires and route them to the amp? Or do I have to route the rear speaker wires from the HU to my amp?
 

·
Rolling on 19's
Joined
·
879 Posts
Assuming your keeping your stock HU you will need a Line Out Converter, tap into your rear speaker wires with the LOC then use RCA cables from the LOC to your amp, from the amp just run wires to your speakers and your set.
 

·
Registered
Joined
·
217 Posts
Discussion Starter #3
Assuming your keeping your stock HU you will need a Line Out Converter, tap into your rear speaker wires with the LOC then use RCA cables from the LOC to your amp, from the amp just run wires to your speakers and your set.
When I run the wires from my amp to the speakers, do I remove the factory harness and use direct connect wires to my speakers?
 

·
what's cracking?
Joined
·
357 Posts
i always like to run new wires, so that would be my suggestion. i don't know about the 7th gen cars but it's pretty easy to run new wires for a 6th gen.
 
1 - 4 of 4 Posts
Top