ive used hte swi-x product made by PAC. it works, problem is, it really doesnt work all the time.
It basically imitates a remote control for the HU. you gotta attatch it to the wiring harness behind the deck, then run the optical cable down the middle console, and find a decent place to mount the lens. it might just be the location i placed mine in, (coin box) but it works sometimes and others it doesnt.
I had a problem with the resistors but called up PAC and they helped me out with it. also, you gotta program the buttons before putting the deck back.
hello all, first post here.
years ago i did the basic LED conversions all around the car. i am just recently making new mods and improvements and am considering upgrading my climate control indicator lights to LEDs. the only withdrawal i am having is that i’ve read soldering is required. has...
A little while ago i said i'd make this DIY so here i am... and still not done with all my pieces but very close ;)
Some of you may find my processes/materials a bit excessive but im just showing you how I did it, you can do it however you wish, using whatever you want.
Materials I Used...