Accord V6 Forum banner

1 - 12 of 12 Posts

·
EliteCM.net
Joined
·
5,369 Posts
Discussion Starter #1 (Edited)
TL ballasts wtih 9006 connectors

Now im selling this ballasts( got my 55W once this morning).
TL ballasts and i modifyd it it to 9006 connectors
ballasts work fine. not sure how many hours on them

$150 OBO




 

·
EliteCM.net
Joined
·
5,369 Posts
Discussion Starter #6
opened ballast up. soldered out old connectors, got stanley 9006 bulbs, cut off bulb part and soldered connectors onto ballasts board. i did nessary modification to bulb and screwed it in place just like TL connector was


 

·
EliteCM.net
Joined
·
5,369 Posts
Discussion Starter #8
um, if i understand you right you want philips bulbs into stock headlights that are rebased for 9006(rebased hid bulbs still have d2s/r connector, they just fit into 9006 housing), if its what you mean then you will still need rebased bulbs, you just can use this ballasts with your stock wiring(if you want to but ppl still tell you to get custom harnes) its just easier to have 9006 connectors and not special TL once
 

·
EliteCM.net
Joined
·
5,369 Posts
Discussion Starter #10
then if you get this ballasts you can use without anything else i belive, i just have to check polarity on connectors and on my car if its same. but i would recomend getting harness for ballasts anyway, they will last longer
 

·
Banned
Joined
·
5,438 Posts
damn i would get these but i bought some g35/350Z ballasts/ignitors for $70

sorry for jacking your thread,

but goodluck with sale.
 
1 - 12 of 12 Posts
Top