Accord V6 Forum banner

1 - 12 of 12 Posts

·
Registered
Joined
·
984 Posts
Discussion Starter #1
Wassup guys,

As the title says, anyone have a short shifter or know where and what to get?

Thanks for the info,
Dan
 

·
Registered
Joined
·
567 Posts
neuspeed....thats all i kno of....check out their site

ps...i heard u sold ur car for a gold mine...what u gonna get?
 

·
Registered
Joined
·
984 Posts
Discussion Starter #3
AwSoMNaMjA said:
neuspeed....thats all i kno of....check out their site

ps...i heard u sold ur car for a gold mine...what u gonna get?
Yup..:D Sold my car for 15gs. I already picked up a Black 7th gen coupe!
 

·
Registered
Joined
·
567 Posts
loxllxol said:
Yup..:D Sold my car for 15gs. I already picked up a Black 7th gen coupe!
mmm sexy....welcome to the matrix.....i mean the 7th gen club.:D
 

·
Registered
Joined
·
984 Posts
Discussion Starter #7
How do you take off the OEM shifter anyway? Just twist off or somethin?

Also can you use an aftermarket shiftknob with the OEM boot?
 

·
Registered
Joined
·
1,116 Posts
How do you take off the OEM shifter anyway? Just twist off or somethin?

Also can you use an aftermarket shiftknob with the OEM boot?
Yes to both questions. The OEM shift knob is screwed on, and all that's required is to turn it many times until it comes off. The OEM boot doesn't affect what shifter you finally decide to put on.
 

·
Registered
Joined
·
1,116 Posts
Also, if you want a shifter that is slightly lower, you can remove the hex nut on the bottom just above the boot. It will give you about a half-inch off the height. I did this little mod within the first week after I bought the car.
 

·
Registered
Joined
·
984 Posts
Discussion Starter #11
APOLLON said:
Also, if you want a shifter that is slightly lower, you can remove the hex nut on the bottom just above the boot. It will give you about a half-inch off the height. I did this little mod within the first week after I bought the car.
I took apart the shift knob and boot and didn't see any hex nut. The only one I saw that even comes close to what you're sayin is that black plastic ring between the shift knob and boot.

Could you explain more?
 

·
Registered
Joined
·
487 Posts
i have the neuspeed shortshifter. it makes shifting kinda rough when you first put it in.. but otherwise, i'd recommend it.
 
1 - 12 of 12 Posts
Top