I have a 2000 accord sedan LX ...as you guys know they come in 4 lug im looking to convert to 5 lug if possible. Plez any info is helpful and appreciated.
Instructions & Parts for 4 to 5 lug Conversion
dashyt2dafulliz
41 - 57 of 57 Posts
I have an I4 with rear drums in the back. so all i need to buy is
Front
44600-S87-A00 36316 005 2 HUB ASSY., FR. 59.18 41.43
90113-S84-901 28608 019 2 BOLT, WHEEL 1.12 0.78
45255-SS0-G00 33574 016 2 SPLASH GUARD, FR. BRAKE (15 in.) 34.00 23.80
Rear
90113-SM1-005 22398 033 2 BOLT, WHEEL (ROCKNEL FASTENER) 1.50 1.05
42200-S87-C52 4878984 002 2 BEARING ASSY., RR. HUB UNIT 106.40 74.48
??
Joined
·
60 Posts
I would also buy all 10 bolts instead of just extra's to make it 5 bolt
FRONT
90113-S84-901 28608 019 10 BOLT, WHEEL 1.12 0.78
REAR
90113-SM1-005 22398 033 10 BOLT, WHEEL (ROCKNEL FASTENER) 1.50 1.05
As far as drums as this being all you need, you might need to check because I have discs in the rear
FRONT
90113-S84-901 28608 019 10 BOLT, WHEEL 1.12 0.78
REAR
90113-SM1-005 22398 033 10 BOLT, WHEEL (ROCKNEL FASTENER) 1.50 1.05
As far as drums as this being all you need, you might need to check because I have discs in the rear
Joined
·
219 Posts
Any of you guys know if we could use the 5gen Accord V6 parts for this conversion?
Joined
·
24 Posts
Can someone please post what parts are needed in order to do a Rear Disc Swap?
Everyone is posting how to do a 5 Lug Swap on Accord that already have rear disc but are 4 bolt. Mine are 4 bolt Rear Drum and I'm trying to figure out how to do the Complete conversion but I'm only really getting half the answers I need.
Thanks guys.
Everyone is posting how to do a 5 Lug Swap on Accord that already have rear disc but are 4 bolt. Mine are 4 bolt Rear Drum and I'm trying to figure out how to do the Complete conversion but I'm only really getting half the answers I need.
Thanks guys.
Joined
·
59 Posts
Yeah same here. Info would be nice.
Joined
·
361 Posts
2 ways - swap out knuckles or swap out the hubs.
yes its very possible,scoot to the salvage yard and snatch a rear disc set up from an I-4 ex. they came with rear disc and leather interior.
have fun but be advised,the 6th gen accord had a linked suspension in the rear unlike the accords before it. it shouldn't be too hard though.
have fun but be advised,the 6th gen accord had a linked suspension in the rear unlike the accords before it. it shouldn't be too hard though.
Joined
·
305 Posts
From looking at the 01 LX 4 and 01 LX 6 cyl schematics on Majestic Honda's parts site it seems that the bearings/clips are the exact same.
So after the hub/studs/rotors/pads/caliper assembly, what else would there be for the front? Nothing, right?
Will the brake lines from the 4 cyl be able to be mated with the v6 caliper hardware?
So after the hub/studs/rotors/pads/caliper assembly, what else would there be for the front? Nothing, right?
Will the brake lines from the 4 cyl be able to be mated with the v6 caliper hardware?
Joined
·
1 Posts
im doing this swap soon ,i just purchased 2 front knuckles complete,2 rear knuckles complete,the v6 front calipers,going to pick up new ball joints for front.but if you have 4 wheel disc already, the rear calipers,and e brake cables work fine. maybe if i do this soon i will post a how to with pics.
Joined
·
13 Posts
To do a 5 lug conversion on a 6th generation accord you only have to change your four lug hub to the 5 lug hub which is pressed in. buy the front V6 calipers from autozone as well as the front V6 rotors. replace your old brake hoses with new ones while your at it. The rear conversion is even easier IF you have rear disc brakes IF you dont your on your own. For the rear ALL you need to do is the replace the 4 lug rear bearing hub assembly with a five lug as well as the rotor and your done. everything else is identical to it V6 counterpart. Of course dont take my word for it call hondas part department and they will tell you the same thing. Hope this helps.
Hi guys....I'm new to this forum, so I'm planning to work on my 1999 accord LX 4cyc this weekend, I've purchased some oem rims at a bargain price. My question is as follows, will a 2000 prelude type base (the knuckle, hub assembly, rotors, studs, and ball joints) fit my car?
thanks in advance!
thanks in advance!
Joined
·
1 Posts
Wondering if I can take the wheel hubs off my wrecked 03 accord and put them on my 95 lx? I want the 5 lug but dont have the money to buy new gear right now, just bought a new engine so funds are tight. Probably a stupid question but worth asking. Thanks
Joined
·
1 Posts
What if I did a five lug to 4 lug conversion
41 - 57 of 57 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
