[chuloav6]

Great news. Did you change any pins on the accord ecu harness.

 

[06Accord6spd]

Great news. Did you change any pins on the accord ecu harness.

I'll make those changes tonight. Any tips on removing the pins from the connector? I know that there is just some release to depress, but I've not worked with these particular connectors before. A big picture would be great if anyone has a link.

 

[chuloav6]

I thought I had some pic on my phone when I change mine but I must have deleted. but yea there is a release its white in color. check this out. by the end of the first page good luck

http://www.v6performance.net/forums...g-honda-accord-performance-discussion/215071-j32a3-swap-7g-accord-1-4-mile.html

 

[06Accord6spd]

My cruise has not worked since my swap. Neither has the oil percentage minder (I didn't use it anyway)

OK, I'm sure we have the same issue here because my oil monitor is also not working. Cruise was working intermittently but now not at all.

Has anyone else had these problems?

BTW, I've got over 5K miles on the swap since I finished it about 3 weeks ago. Other than a couple of minor issues including the one above in this post, it's been working well.

I verified that the speed limiter has changed and I got worst of 26.5 mpg on the highway and a number of tanks at just over 30 mpg. So it's about the same as with the J30.

Todd

 

[chuloav6]

OK, I'm sure we have the same issue here because my oil monitor is also not working. Cruise was working intermittently but now not at all.

Has anyone else had these problems?

BTW, I've got over 5K miles on the swap since I finished it about 3 weeks ago. Other than a couple of minor issues including the one above in this post, it's been working well.

I verified that the speed limiter has changed and I got worst of 26.5 mpg on the highway and a number of tanks at just over 30 mpg. So it's about the same as with the J30.

Todd

my oil monitor and Cruise arent working neither, but I get 30 and 31 mpg highway

 

[simione]

My swap has been working flawlessly since being done. I got 403 miles out of my last tank. Better mileage than my j30, that is for sure.

 

[06Accord6spd]

OK, I'll have to look at the wiring then. I don't care about the oil life monitor but I do want cruise control for long trips. Shouldn't be too difficult to figure out.

I had seen someone else report horrible mileage which didn't make sense to me, but I'm happy with mine. On this recent trip I had several tanks over 400 miles with 465 being the highest. I put 15.2 gallons on that fill. I think the best that I ever got with the J30 was 31.5 mpg.

Todd

 

[simione]

http://www.v6performance.net/forums...honda-accord-performance-discussion/215071-j32a3-swap-7g-accord-1-4-mile-2.html

Post number 48. I bet that will solve our cruise issue

 

[06Accord6spd]

http://www.v6performance.net/forums...honda-accord-performance-discussion/215071-j32a3-swap-7g-accord-1-4-mile-2.html

Post number 48. I bet that will solve our cruise issue

I was thinking about that too but couldn't remember where I saw it. Thanks! I was thinking that it wouldn't matter since it just cancels the cruise, but since A30 is open, that input would just be floating & I guess could be interpreted as a low signal and possibly cancelling the cruise.

I'm also interested to know what A13 is on the J32 ecu. I have a pinout that says "S-DN" but I can't think of what that is. But right now in mine it is getting the clutch switch signal. So it could be messing something else up. And then the other question is, what wire should be there? I have the Honda manual but not the Acura. I need a schematic for the Acura cruise.

 

[06Accord6spd]

http://www.v6performance.net/forums...honda-accord-performance-discussion/215071-j32a3-swap-7g-accord-1-4-mile-2.html

Post number 48. I bet that will solve our cruise issue

This was the fix for inop cruise.

Thanks!