no it won't rub, i have 0 finger gap riding on 17x8 TL rims and it's fine, unless you hit like huge bumps then it might rub a little but you'll have no rubbing issues

 

no it won't rub, i have 0 finger gap riding on 17x8 TL rims and it's fine, unless you hit like huge bumps then it might rub a little but you'll have no rubbing issues

Nice! Cause my car is lowered with 2 finger gap and it doesn't look lowered to me so i figured lowering to no gap would actually be low the way i want it.

 

I think as long as you drive carefully around hazardous areas, you will be fine. My tires are about = with my fenders, but because I drive carefully, I rarely rub. But, I'm not at a 0 finger gap, I have 1 finger all around.

 

isn't stock tires 205/60/16??? shud b fine with 1finger gap cuz i had my coilovers dropped bout that height, but i don't have a big load or carry passengers/heavy stereo systems,etc.
if u dropped that low, u gonna have to get front AND rear camber kits im sure! im too lazy to get the front camber kit but i do got the back ones, GL

 

itll tuck in under the fender if anything so you can even lower it more then no gap, i had 18x7.5 rims before and it tucked under the fender with no rubbing issues =D

 

isn't stock tires 205/60/16??? shud b fine with 1finger gap cuz i had my coilovers dropped bout that height, but i don't have a big load or carry passengers/heavy stereo systems,etc.
if u dropped that low, u gonna have to get front AND rear camber kits im sure! im too lazy to get the front camber kit but i do got the back ones, GL

Stock is 205, but you can fit 215 on stock rims.

I'm riding with no gap and never have any problems rubbing. Then again, I don't have either front or rear camber kits which helps slightly.

 

Shouldn't be too much of an issue.

 

I'm dumpped with negative 2 fingers and I don't rub. Only timed I rubb was taking a turn too hard down hill...

 

Sorry I meant 205 tires lol. I wasn't sure what size I had so i took a guess of 215.

 

Sorry I meant 205 tires lol. I wasn't sure what size I had so i took a guess of 215.

if ure on stock rims u should have no worries....dump it as much as u want and it should be all gravey.

 

i have the tein ssp coilovers

and when i had the stock 16"ers ther was no finger gap and there was no rubbingg ...

dump it!

 

Lol thanks guys! Yeah I just called my friend and ordered it. I should get it sometime this week then install it next weekend.

 

Lol klepto you dont really need a camber kit if you gonna do alightnment. It all matters if you install your coilovers properly, and have an alignment done few times a year no need for a camber kit really...As for MR.Dopey you won't rub if you go all the way even though basics won't even let you get as slammed as other coilovers...

 

Lol klepto you dont really need a camber kit if you gonna do alightnment. It all matters if you install your coilovers properly, and have an alignment done few times a year no need for a camber kit really...As for MR.Dopey you won't rub if you go all the way even though basics won't even let you get as slammed as other coilovers...

:and1: :clap:

 

im drop with 1 finger
with 18s running 225 and im rubbin

 

SLAM IT!! no need for finger gaps

 

im drop with 1 finger
with 18s running 225 and im rubbin

It's because your offset (+40mm I'm assuming on the 57C's) is all whack and you're set to -0 -> 1 degree camber.

You honestly expected to ride +40mm, 225 18s with 1 finger gap, NOT have to do any sort of fender and/or wheel modification and not rub? Funny.

Oh that and because you have a sedan. morpheiz had the same problem with +42.
:rolleye2:

 

ya i kno
think im planning on rolling the fender htis yer

 

ya i kno
think im planning on rolling the fender htis yer

We rolled his fender and still had the same problem.

GL man.