[SpEeD LuNaTiKz]

2000 Honda Accord V6 Sedan
Advan AVS VS-6
Front: 17x7 +30 Offset
Rear: 17x8 +35 Offset
Tire Size: 215/45/17 Front + Rear
Fenders Rolled: Front + Rear
Suspension: Ksport Control Pro Coilovers
Lowered Amount: 3.5 to 4 Inches
Camber Adjustment: -3 all around

What kind of camber kit are you using? Thanks

 

[inspired1]

2000 Accord Sedan
Work Euroline S2H
Front: 18x8 +38 Offset
Rear: 18x8 +38 Offset
Tire Size: 225/40/18
Fenders: Front - Intact / Rear Rolled & Cut
Suspension: Progress Spring
Lowered Amount: 2.25 Inches
Camber Adjustment: -1.5 all around

Picture later.

 

[CG2]

2000 Honda Accord V6 Coupe
Blitz Type 01
Front: 17x8.5 +35mm Offset
Rear: 17x9.5 +33mm Offset
Tire Size: 225/45/17
Fenders Rolled: yes
Suspension: Omni Power Full Suspension (2005)
Lowered Amount: Not sure
Camber Adjustment: No Camber Kit

 

[CRV_33]

late summer cleaning...thread has been sticki-fied!

 

[Dtownz Thrillah]

OMG thanks Mike!

I need to get some new wheels now Mike, you do too!

 

[turbo_911]

2000 Honda Accord EX Coupe
Wheels: 5ZIGEN FN01R-C
Front Specifications: 18x7.5 +43 Offset
Rear Specifications: 18x7.5 +43 Offset
Tire Size/Model - Front&Rear: 225/40/18 General Exclaim UHP
Fenders Rolled/Cut/Pulled: none
Suspension: Tein S-Tech
Lowered Amount: ~1.9
Camber Adjustment: have camber kit on rear. Front: -1.5, Rear: -2.0

Notes: front fender liner rubs a bit, and rear rubs on turns, 3+ ppl crazy rubbing lol

Pictures:

 

[S1n1sTeR]

2001 Accord, EXL
Wheels: TE37
Front & Rear: 18X7.5 +31Offset
Tires: Front: Dunlop direzza sport z1 star spec 225/40/18
Rear: Nitto Invo 225/40/18
Fenders: Rolled the rears only.
Suspension: Ksport coilovers.
Camber: some but not sure.
Notes: Front sits absolutely flushed and rear can use a 5mm spacer. NO rubbing never anywhere.

Wheels: Tenzo DC6
Front & Rear: 18X8 +45Offset
Tires: Front: Nitto Invo 225/40/18
Rear: Nitto Invo 225/40/18
Fenders: Rolled the rears only.
Suspension: Ksport coilovers.
Camber: none.
Notes: Could use about 10mm spacer but rubbed every now and then. Nothing major though.

 

[IcyAccord]

1999 Honda Accord V6 Coupe
Wheels:
Front Specifications: 18x8 +15 (With 20mm spacer)
Rear Specifications: 18x9 +25 (with 15mm spacer)
Tire Size/Model - Front&Rear: Sumitomo HTRZIII / Yokohama YK520 (225/40/18)
Fenders Rolled/Cut/Pulled: Front and rear rolled&pulled ~3mm
Suspension: AMR
Lowered Amount: plenty.
Camber Adjustment: Front: -2.1, Rear: -3.0

Notes:

Pictures:

 

[slowaccord]

^^this was the set that made ur car. the advans that came after were aggressive but this set was gorgeous!

 

[IcyAccord]

dont remind me :'(

 

[slowaccord]

hahaha u fugged up by selling ur bbs and i shouldnt have sold my algernons. oh well.

 

[av6_sm1ke]

^ Sick. Hellaflush ftw!

With the fenders rolled and pulled 3mm, could you make full lock turns or did it still rub in the front?

Edit: I meant with the BBS wheels.

 

[changaroo]

how much clearance do we have to the suspension?

 

[Doctor_X]

From what...?

lol

Need more information than that!

 

[changaroo]

like whats the max width / offset you can run without getting too close to the suspension?

 

[Doctor_X]

I guess it depends on your amount of camber and fender work. Steve was able to pull off 10s in the rear, so in some instances "the sky is the limit" within reason lol.

 

[IcyAccord]

I had less than 1 inch from the strut with -4 camber. Lets leave it at that.

 

[changaroo]

I had less than 1 inch from the strut with -4 camber. Lets leave it at that.

was that front or rear?

 

[HECz_]

rear

 

[swollen_cu]

Hey guys do you think I could fit these wheels on my 6th gen sedan?

17x8.5 +25 215/45 tires

I have -1.7 F and -3 R camber, lowered about 3 inches. My rear fenders are rolled and rear bumper tab shaved down a little bit.