[mild2wildaccord]

+1


How/where did you figure that they were 11"? From the pics you posted earlier, with the small camber you have I'd expect an 11" rim to poke waaaay more on a sedan than yours appears to. I'd also expect it to be hitting the strut by...a lot.

Says it on the back of the wheel sir, how else would I know?

 

[MoneyPit]

How else would you know? Tape measure? Haha.

But yeah, that's crazy. I still have no idea how those are clearing your struts.

 

[bdeitemeyer]

Hmm...he has 15mm less inner clearance than my rear setup. I don't remember there being that much room back there, but that's dependent on his ride height and camber settings. I too would expect at least a lot more poke from that setup than what it's showing. Maybe the pics are coming from somewhat deceiving angles that aren't really showing the whole picture?

 

[Raymond]

What would be "easier" to fit, front and rear, 18x9s, +24 or +30 ? Would either even be reasonable for a daily driver?

 

[mild2wildaccord]

It doesn't poke much because the car is tucking half of the tire with a roll and pull. If I raise up the car you would notice almost half of the wheel stick out. Remember its on all stock arms in the rear for camber, cast,and toe just slammed all the way.

The offset is just einoth that it doesn't hit the struts because my other set I was running 18x10 with +35 it rub the struts when shocks compressed.

18x9 +30 of course for daily but you will be eating tires every 6months or so depending on your camber, cast, and toe alignments.

 

[changaroo]

post more pics. we only got a half ass pic from the back.

 

[mild2wildaccord]

car in shop now. also need new tranny so it will be awhile for nice pictures.

 

[Raymond]

18x8 +48 would fit fine right? I see Changaroo's car on his old RX8 wheels were 18x8 +50, so I imagine I would be okay. Not an aggressive set-up, but maybe with some spacers in the rear to bring things out?

 

[Doctor_X]

Trust me... You won't have ANY issues with that sizing. If anyone knows it's me. I'm 18x7.5 +48mm right now so a quarter of an inch on either side of my wheels would be more than fine. I have some crazy gap between the sidewall of my tire and the fender.

 

[Raymond]

hmmmmm, then I might have found the wheels I want to save up for. I'm not looking to go for a crazy hellaflush set-up, I love the look but I just can't justify it for daily driving my car the way I do. Just trying to do some more research on the brand, we'll see!

 

[SLBwondertwin]

17x8 enkei wheels

Hi,

I have a 99 v6 coupe and it's dropped on tein s springs and tokiko
blues (and I also have the illuminas)..
I have 17x8 enkei rims that my friend wants to sell me, are these
wheels compatible? Will they fit and if not would I have to roll my
fenders or stretch my tires?


Stephanie

 

[Doctor_X]

It depends on the offset...

 

[av6_sm1ke]

Don't forget bolt pattern

 

[SLBwondertwin]

5x114 or 5x114.3 not sure about the offset...it's coming off a rsx

 

[i<3jdm]

The gold seden with the crazy hood looks amazing

 

[Johnson]

2002 Honda Accord V6 Sedan
Enkei RPF1 Wheels
Front: 18x9.5 +15 Offset
Rear: 18x9.5 +15 Offset
Tire Size: 215/40/80 Front, 215/40/18 Rear
Fenders Rolled: Rear and front
Suspension: F2 Type 2
Lowered Amount:
Camber Adjustment: -3.7 front -4 rear

sorry for big pics

 

[meow]

^ i take it that the performance aspect of that car is non-existant? lol.

 

[Mr4Gotten]

hey man i love the way your coupe sits. did u have the mid piece from your trunk shaved and if so how hard was it??? let me know

 

[Doctor_X]

:facepalm2:

 

[99v6sedan]

johnson your car is sooooo illmatic. probably one of my favorite sedans as of right now.