[Fundillo]

hope adapters count
Front: 17x8.5 +21

Back: 17x9.5 +21

 

[st3b0]

17x9 +20 they're bronze falken hanabis...

 

[BartmanFS52]

Awesome Pics. Im going with 40

 

[Accord4U2NV619]

2000 Honda Accord Coupe EX (4cylinder)
Wheels: SSR Hasemi Mesh
Front Specifications: 18x8.5 +42 Offset
Rear Specifications: 18x8.5 +42 Offset
Tire Size - Front&Rear: 225/40/18
Fenders Rolled/Cut: Rear cut fenders
Suspension: cut Sprint springs on Tokico Illumina in front, cut H&R race rear on Tokico Illumina
Lowered Amount: tuckin half a tire with full tank of gas
Camber Adjustment: Front: -1.3, Rear: -1.3

Notes: broke for now still savin for some decent coilovers

 

[Dtownz Thrillah]

looking great!

 

[lilfotoman]

clean sedan!

 

[Snicker60515]

Noob question here but I would like to know(I think again?). What is a rolled fender?
Great looking cars though BTW, makes me want to go bigger than 17" on my car, but the 6-speed swap comes before everything else!

 

[Rich Yung Kidd]

2000 Honda Accord Coupe EX (4cylinder)
Wheels: SSR Hasemi Mesh
Front Specifications: 18x8.5 +42 Offset
Rear Specifications: 18x8.5 +42 Offset
Tire Size - Front&Rear: 225/40/18
Fenders Rolled/Cut: Rear cut fenders
Suspension: cut Sprint springs on Tokico Illumina in front, cut H&R race rear on Tokico Illumina
Lowered Amount: tuckin half a tire with full tank of gas
Camber Adjustment: Front: -1.3, Rear: -1.3

Notes: broke for now still savin for some decent coilovers

how low is your car? 2.5 inches? I'm thinking about droppin my car and i'm wondering if 2.5 is too close to the ground

 

[Rich Yung Kidd]

Can anyone explain to me what offset works and wouldn't work for 6gens. I see all types of offsets but which is most common and which is not recommended?

 

[YounGLeMoNs]

offset is how the wheel is seated in ur wheel well. the lower the offset the more it pokes out, the higher the offset the more inward it will be. wheel will be straight unless u have negative camber.

 

[Rich Yung Kidd]

is a 38 offset considered a good offset or do somewhere in the 40's sit better?

 

[CRV_33]

is a 38 offset considered a good offset or do somewhere in the 40's sit better?

you also need to factor in the width of the wheel

 

[Rich Yung Kidd]

i guess buying wheels can be a tricky thing

 

[Rich Yung Kidd]

I just bought sum wheels for my car and the measurements are 17 x 7 with a +38 offset. My car is dropped 2 inches so I was wondering if anyone have a clue of how the wheels will fit?

 

[Johnson]

2002 Honda Accord V6 Sedan
Enkei RPF1 Wheels
Front: 17x8 +30 Offset
Rear: 17x8 +20 Offset
Tire Size: 215/45/17 Front, 225/45/17 Rear
Fenders Rolled: Rear and front
Suspension: F2 Type 2
Lowered Amount: 2.5
Camber Adjustment: No Camber Kit

 

[Coupe Freak]

2002 Honda Accord V6 Coupe
Corniche Le Mans
Front: 8,5x19+45 225/35 19
Rear: 9,5x19+45 225/35 19
Suspension: K-Sport

 

[Supasnipa360]

I just bought sum wheels for my car and the measurements are 17 x 7 with a +38 offset. My car is dropped 2 inches so I was wondering if anyone have a clue of how the wheels will fit?

You shouldnt have a problem.
If you have say a 17x9 you would see offset in the low 20s.
now go down another inch in width and you would add roughly 10mm to the offset for it to look right.

 

[IcyAccord]

2002 Honda Accord V6 Sedan
Enkei RPF1 Wheels
Front: 17x8 +30 Offset
Rear: 17x8 +20 Offset
Tire Size: 215/45/17 Front, 225/45/17 Rear
Fenders Rolled: Rear and front
Suspension: F2 Type 2
Lowered Amount: 2.5
Camber Adjustment: No Camber Kit

I don't compliment much, but this is super clean. I love it, great work.

 

[Dtownz Thrillah]

I ****ing love you Steve!

 

[mild2wildaccord]

18x9 +27 215/35/18 nankang ns2
18x11+25 235/40/18 nankang ns2

Car is about go in for a makeover in two weeks.